Specifications

- 14 -
the name.
Domain Name
For example: yourcompany.com. The maximu
m
input for this field is 32 alphanumeric character
s
and it is case insensitive
PPPoE Account
Active Profile ~1 ~2 ~3 You can set up to thre
e
PPPoE accounts, while only one account can b
e
enabled at a time. To set the profile, select th
e
profile number, enter all the information, and the
n
click on Save. The device will save th
e
information, restart and return to the previou
s
menu page. If you don’t see the saved informatio
n
on the screen, from the menu on the left, click o
n
the “Internet Port” to refresh the screen.
Username
Maximum input is 52 alphanumeric characters
(case sensitive)
Password
Maximum input is 36 alphanumeric characters
(case sensitive)
Service Name
For identification purpose. If it is required, your
ISP will provide you with the information.
Max packet size (TCP MSS): Click the down
arrow  to select the most appropriate MSS
(maximum segment size; default value is 1452) for
your application. Reducing the packet size can
help connecting to certain web sites or speeding
up packet transfer rate. If the incorrect selection is
selected, you may not be able to open certain web
sites.
Static IP Address: Enter the IP address provided by your ISP.
Static DNS Server
Enter the primary and secondary DNS addresses
provided by your ISP.
Auto-disconnect if idle for  minutes
Configure this device to disconnect the PPPoE
connection when there is no activity for a
predetermined period of time.
Default: 5 minutes. You can input any number
from 0 to 65535.
To keep the line always connected, set the number
to 0.
Auto-reconnect
Check to enable auto-reconnected with PPPoE
line. This function allows the device to
automatically reconnect when the line is
disconnected due to ISP problem.