User`s manual

6.2 Forget Password?

If you forget the password to log in to the Web Configuration Tool, you can reload the

factory default settings into Broadband Router with the Reset button.

Solution:

Step 1. Disconnect Broadband Router’s power adapter from the power

outlet.

Step 2. Press the Reset button on the back panel and keep holding it.

Then plug Broadband Router’s power adapter into the power

outlet.

Step 3. It takes around 15 seconds to reset the Broadband Router. The

Power LED will turn on in Green initially. Wait for the Power

LED becomes Red. Then release the Reset button.

Step 4. Try to connect http://192.168.1.1/ via your Web browser. Use the

user name “admin” and the password “admin” to obtain

authentication. If it is failed, please try the approach again.