User`s manual

As illustrated above, when Broadband Router receives traffic of Port 21 from the
Internet, it will forward it to the FTP server with LAN IP address 192.168.1.2. If
Broadband Router receives traffic of Port 80, it will re-direct it to the Web server with
LAN IP 192.168.1.3.
To enable Virtual server, enter the port number to specify the service type, and the
server’s LAN IP address for the traffic destination. Check Enable. Then click the
button Apply to make your settings take effect. For the information of port number
and the corresponding service, please refer to Appendix B: Common Port Numbers.
32