User Manual

ManualsBrandsAogled ManualsComputer Accessories & PeripheralsComputer Monitor Light Bar,Screenbar E-Reading USB Powered Monitor Clamp Lamp,Dimmable,Eye Protect Clip On Monitor Lamps,Adjustable Brightness/Color Temperature,Over Monitor Light Bar Black

Instructions

Setp1. Insert the eye-protection rigid strip into the supporting holder. The holder is stuck in the middle position of the rigid strip. When you insert the

holder, pay attention to the USB cable running through the middle position of the holder.

Step 2. According to the thickness of the monitor to adjust the size of the holder bayonet, the holder should be stuck in the middle of the display above.

Step 3. After installing the eye-protection rigid strip and the holder, arrange the USB cable, and place the dimmer in a suitable position on the desktop

of the computer, so as to facilitate the adjustment of the lighting effect in the process of use;

Step 4. Insert the USB connector into the USB port of the computer or the 5V adapter, turn on the power, and press the switch key of the dimmer, then

the eye-protection light can be lighted. By fine-tuning the position of the eye-protection light in the fixture and pressing the dimmer, the illumination area

and lighting effect of the eye-protection light can be adjusted.

1CM ~ 3.5CM