Users Manual

Installation
1. Put the FWS-2275 on the table and find 3 network routes to connect the
LAN port to the broadband sharer.
2. Set the internal IP of the sharer. Otherwise, the default value of the sharer
can be used. Most of them are 192.168.11.X or 192.168.3.X. This X is the
IP that is automatically assigned to each sharer. Note Most of the sharers
use 192.168.X.1 as the IP of Gateway.
3. Consider the server to provide those services, the IP of the server (mostly
the IP of 192.168.X.250), and the Port Number of these services. Install
the server, connect the sharer, find the PC and connect to the sharer to
determine the server. The service is normal.
4. Its WIFI and Bluetooth can also be used in communication.