Service manual

17” LCD Color Monitor Wipro WLA171t

Front Panel Control

• Power Button:

Press this button to turn the monitor ON or OFF.

• Power Indicator:

Green — Power On mode.

Orange — Off mode.

• MENU / ENTER:

Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD

menu when in Brightness /Contrast Adjust OSD status.

• Volume:

Increase volume or adjust function.

• Volume:

Decrease volume or adjust function.

• Auto Adjust button / Exit:

1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).

2.When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.

The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.

OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press

power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off

and then press power button to turn the monitor on.

NOTES

• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to

direct sunlight, or excessive dust or mechanical vibration or shock.

• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your

monitor.

• For maximum protection, repackage your monitor as it was originally packed at the factory.

• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a

cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or

abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before

cleaning it.