Operating instructions

5
2. Operating Instructions
2.1 Control Panel and Interface
Side panel
Signal source: Press button to enter the interface of signal source selections and press again to select the source
needed. When menu is unavailable on display.Once menu occur, this key is used for confirmation
purpose and select to confirm target you needed.
Menu: Press to enter or exit the menu.
▲ ▼: When the menu appears on the screen, use these two buttons to select the desired option.
Volume:, With the menu displayed on the screen, press these two buttons to select the desired option. When
no OSD menu is displayed on the screen, the controls will adjust sound volume.
Source Interface
A device with multiple sources can be connected to your monitor. The figure below shows how to connect.
Tip: If you want to wall mount your monitor, all cables must be connected to the monitor connectors first.
Whenever an external device is connected to your monitor, please make sure the monitor is turned off.
When connecting an external device, connect the cable to the connector with the same color.