Thank you for choosing this AOC LED TV. Before installing and turning on your AOC LED TV, please spend a few minutes to read this manual thoroughly and retain it for future reference. Note: This product is subject to continuing improvement, and changes may be made without prior notice. *The illustrations in the manual may not be exactly the same as those displayed on the screen. In this case, please operate according to the version you have purchased.
Contents IMPORTANT INFORMATION ............................................................................................................................................................. 3 WARNING............................................................................................................................................................................................................................. 3 CAUTION ................................................................................
Important Safety Instructions Important Information WARNING This symbol is intended to alert the user to the presence of un-insulated dangerous voltage that may cause risk of electric shock to persons. 1) 2) 3) 4) Read and keep these instructions. Heed all warnings. Follow all instructions. Connect the TV only to the appropriate power source. 5) Do not install the TV in places with high temperatures or humidity or places with excessive dust or mechanical vibration.
Safe use of TV Installation Placement for viewing When watching TV, users are recommended to maintain at a distance of 3-7 times the screen height and watch in moderately bright surroundings. Watching TV for too long or in a dark environment may cause eye fatigue. In order to obtain a clear picture, do not project the screen to direct illumination. Users are recommended to use spot lighting directed down from the ceiling and block the screen with an opaque cloth.
y Although smears may appear on the screen or the screen may turn y y y y lightning storms or when unused for long periods of time in order to prevent damage to the TV as a result of lightning or power line surges, and thereby enhance the protection for the TV. dark when using the TV in a cold environment, it is not a sign of failure. As the temperature rises, the condition will improve. Ghosting may occur on the screen when still pictures are displayed for a long time.
Small accessories Cleaning Keep small accessories out of children’s reach. Cleaning the AC power plug Unplug the AC power cord to clean the plug regularly. If too much dust is deposited on the plug, it will absorb moisture, which reduces insulation performance and may lead to a fire. Clean the TV screen and enclosure y Unplug the AC power cord from the outlet to prevent electric shock during the cleaning process. y Clean the TV enclosure with a soft dry cloth.
Ventilation The vents on the TV enclosure are intended for ventilation. Do not block or cover these vents to ensure reliable TV operations and prevent it from overheating. Dust and dirt deposits will accumulate in the TV in case of poor ventilation. Follow the instructions below to ensure good ventilation. y Do not install the TV with the screen facing upwards, downwards or to either side. y Do not install the TV turned over or upside down. y Do not cover the ventilation vents with cloth or any materials.
Package Contents After opening the TV package , check if the TV and all accessories are in good condition and free from damage. Not all signal cables (Analog, USB, DVI, and HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Locating controls and input in the TV Volume + Volume Channel + Channel Menu Source Power Button HDMI Input VGA Input PC Audio Input HDMI VGA AUDIO Headphone Jack Service R Component Video Input (YPbPr) L Y Pb Pr R L Video Composite Video Input Tuner CV IN AV IN Video L S-video Input R S-VIDEO AV OUT Composite Video Output Item Description Headphone Jack Composite Video Input Composite Video Output S-video Input HDMI Input For users to connect the headphones.
Buttons located on the right hand side of the TV operate the same way as these buttons on the remote control. Button Description Press this button to turn the TV on and off. When the TV is turned off, it will enter the energy-saving mode instead of disconnecting the power unless the AC supply is turned off or the power cord is unplugged from the outlet. TV/Video/HDMIP Press this button to directly launch to the corresponding mode, including TV/Video/HDMIPC/Component.
Installation Refer to the illustrations in the “Safe Use of TV.” Installing the table-top stand Take out the TV set and the table-top stand from the box and assemble them together with the screws in the attachment box as shown below. 1. Place the TV screen downward on a table covered with a soft cloth or cushion. Put the table-top stand on a firm surface. 2. Insert the table-top stand into the hole at the bottom of the TV set. Place the TV on a firm surface. 1.
Connecting the TV Cable System or VHF/UHF Antenna System Apart from the standard-definition programs, you can watch high-definition programs with this TV (if they are available in your area). This TV supports the reception of unscrambled digital programming for both cable and VHF/UHF antennas.
Connection with Component Video Component Video Input Audio L R HDMI Y AUDIO VGA Pb L Service R L Pr Tuner CV IN Video L R AV OUT R HDMI Y AUDIO VGA Pb Pr Service L R L Tuner CV IN Video L R AV OUT R Connection with Composite Video AV IN Video Audio L HDMI Y VGA Pb Pr AUDIO Service R L Tuner CV IN Video L R AV OUT R Video R Video L Video AV IN S-VIDEO L R L R AV OUT Audio Video L R HDMI Y AUDIO VGA Pb Pr Service R L Tuner CV IN Video
PC Input Signal Reference Table After connecting the PC to the TV with the VGA port, set the PC output signal according to the table below. Default PC mode Standard Resolution H. Sync. (kHz) V. Sync. (kHz) VESA 640 x 480 31.469 59.94 VESA 800 x 600 37.879 60.317 VESA 1024 x 768 48.363 60.004 VESA 1360 x 768 47.72 59.799 WXGA+ 1400 x 900 59.887 55.935 WSXGA 1680 x 1050 59.884 64.674 FHD 1920 x 1080 60 67.
Using AOC TV Turning the TV on and off Press the Power button on the TV or remote control to turn on the TV.
Setting Language 1 Press the Menu button to open the menu. 2 Press the / buttons to select [Function] and press the OK button. 3 Press the / buttons to select [Menu Language]. 4 Press the / button to select a language : 简体中文, English, Français, Español, Português, Русский, ﺔ 5 Press the Menu button to exit.
Search Channels 1 Press the Menu button to open the menu. 2 and press the OK button. Press the / 3 Press the / buttons to select [Auto Search] and press the OK button. 4 Press the / buttons to select [Yes] and press the OK button.
Channel switch/return On the AOC TV, you can directly switch to another channel using the remote control or press the CH to another channel. 1) Press the number buttons to switch to another channel . 2) Press the Program button to switch to another channel. 3) Press the Return button to return to the previous channel. Volume adjustment and muting 1) Press the Volume button to adjust the TV volume. 2) Press the Mute button to mute the TV.
Screen settings 1 Press the Menu button to open the menu. 2 Press the / and press the OK button. buttons to select [Video] 3 / buttons to select an item: Picture Mode , Brightness, Contrast, Color, Sharpness, Noise Reduction , Press the Color Temperature or Screen Ratio and press the OK button to enter. 4 Press the 5 Press the Menu button to exit. / button to adjust. Item Description Brightness Contrast Standard Standard picture settings recommended for home entertainment.
Sound settings 1 Press the Menu button to open the menu. 2 Press the / buttons to select [Audio] and press the OK button. 3 Press the / button to select an item: Sound Mode, Bass, Treble, Balance , MTS, Surround, AVL, and press the OK button to enter. 4 Press the 5 Press the Menu button to exit. / buttons to select. Item Description Voice: Enhances treble and maintains bass at a medium level. Custom: Enhances bass and maintains treble at a medium level.
Channel Settings The channel settings are available only in the TV mode. 1 Press the Menu button to open the menu. 2 Press the / buttons to select [Channel] and press the OK button. 3 Press the / buttons to select an item: Auto Search, Add Channel , Manual Search, Lock Channel , Skip Channel or Channel Exchange and press the OK button to enter. 4 Press the 5 Press the Menu button to exit. / buttons to adjust.
PC Settings These settings are available only in the PC mode. 1 Press the Menu button to open the menu. 2 Press the / buttons to select [PC] and press the OK button. 3 Press the / buttons to select an item: Auto Adjustment., H. Sync, V. Sync, Pitch and Phase and press the OK button to enter. 4 Press the 5 Press the Menu button to exit. Item / buttons to adjust. H.
Function settings 1 Press the Menu button to open the menu. 2 Press the / buttons to select [Function] and press the OK button. 3 Press the / buttons to select an item: Menu Language , Menu Display Time, Sleep Timer, Advanced Contrast, Dynamic Contrast, Backlight Control ,Channel Block or System Reset and press the OK button to enter. 4 Press the 5 Press the Menu button to exit. / buttons to adjust. Item Description Menu Language Selects the TV language .
Troubleshooting Condition No picture No picture Cannot receive any channels The TV is locked to one channel Cannot receive select channels The TV turns off automatically No picture is displayed from some video sources Condition Poor picture quality The quality of images is not as good as seen at the store Double images or ghosts Only snow and noise are displayed on the screen Dotted lines or strips No color/Dark picture/Incorrect colors/Too bright picture Noisy picture Condition No sound/Noisy sound Good pi
Dimensions and specifications Model T2242we T2442e Panel size 54.6cm (21.5”) 60.9cm (24”) Resolution 1920 x 1080 1920 x 1080 Viewing angle Horizontal: 170° Vertical: 160°(Typ.) Horizontal: 170° Vertical: 160°(Typ.
