Service manual

Page 8 of 64
1-3-3 Output connection of Video and Audio signal
2、Interface PIN Description
2-1 D-SUB Pin Description(15 PIN)
Pin Description Pin Description
1
Red Video
9
No Pin!
2
Green Video
10
Sync Ground
3
Blue Video
11
Not Used
4
Not Used
12
Serial Data for DDC
5
Ground
13
H-Sync.
6
Red Ground
14
V-Sync.
7
Green Ground
15
Serial Clock for DDC
8
Blue Ground
2-2 DVI Pin Description
Pin Description Pin Description
1 T.M.D.S Data 2 - 14 +5V Power
2 T.M.D.S Data 2 + 15 Ground
3 T.M.D.S Data 2 Shield 16 Hot Plug Detect
4~5 No Connection 17 T.M.D.S Data 0 -
6 DDC Clock 18 T.M.D.S Data 0 +
7 DDC Data 19 T.M.D.S Data 0 Shield
8 No Connection 20~21 No Connection
9 T.M.D.S Data 1 - 22 T.M.D.S Clock Shield
10 T.M.D.S Data 1 + 23 T.M.D.S Clock +
11 T.M.D.S Data 1 Shield 24 T.M.D.S Clock -
12~13 No Connection 25~29 No Connection
1
6
11 15
5
10
The VIDEO OUTPUT part is analog Video
（CVBS）and Audio output. L & R is Audio left
and right channel.
They can connect to other analog Video（CVBS）
input and Audio input device. See the picture as
top.