Service manual

Page 6 of 64
1-3 Interface and connection
Please connect this display to other equipment as picture below.
You may have many types of equipment as: DVD, VCD, VCR, Set Top Box, X-Box and so on.
1-3-1 Input connection of Video and Audio signal(DVD/VCD/VCR)
We have 2 AV input jacks for VIDEO/AUDIO and S-VIDEO/AUDIO. The R / L is
Audio input for every VIDEO and S-VIDEO.
We have 2 components signal input jack: YCbCr and YPbPr. The R / L is Audio input
for every YCbCr and YPbPr.
If your DVD or Set Top Box have YCbCr or YPbPr output, you can connect it to
YCbCr or YPbPr input jack. And select to YCbCr or YPbPr source input.（Some
DVD or Set Top Box need to set to YCbCr or YPbPr output）
Notice: If you see that display abnormality in screen, you need to check the cable
connection and DVD setup.