Service manual

Page 15 of 64
H．POSITION: Display picture horizontal location adjust
V．POSITION: Display picture vertical location adjust
H.RES: Horizontal resolution adjustment
V.RES: Vertical resolution adjustment
(Optima recommend default setting are not changed)
(H.RES And V.RES function is available on D-SUB input only,
It is normal that display will display black screen during adjustment. ）
PAN AND ZOOM: Press “ADJ+” enter zoom menu
Press “▲/▼” adjuct scale of zoom
When scale larger than 1,press“DISPLAY/INFOR”
key enter pan function. Press “▲/▼”and “ADJ-/ ADJ+”key up / down and left / right the picture
centre to watch.
IMAGE SIZE: Press “ADJ+” enter. Fill all → Normal → Wide → Zoom → Fill all
PIP SIZE: adjust Picture In Picture the sub picture size
PIP POSITION: adjust Picture In Picture the sub picture location
3-3-6 Layout MENU(Multiwindows)
To layout menu
FULL SCREEN: Single Picture mode, press “ ADJ+”key enter.
PIP: Picture In Picture mode, press “ ADJ+” key enter.
SPLIT SCREEN: Two windows display mode, press “ADJ+” key enter.
● PIP: Picture In Picture mode
After enter it, the main picture is D-SUB，sub picture is
AV1,sound is from D-SUB.
User can press “W．SELECT”key select which is main
picture.And the sound is follow to the main picture.
Press “VIDEO” key can select main picture source:
S-VIDEO2 , AV1, AV2 etc.
Press“SWAP” key can exchange two picture.
All these keys are in Remote Control Transmitter, see page