Specifications
6 Philips Fortimo HBMt Gen 3 System Design In Guide
Module drive current, power and thermal specications
The following paragraphs contain the performance specications of the Fortimo
LED High Brightness Module (HBMt) Gen 3 System.
Note:
• All product performances are specified at Tcase= 85° C
• ±10% tolerance applies to lumen specifications
• Philips maintains a tolerance ±6.5% on luminous flux measurements.
• Specifications are complaint with Zhaga Book 4
2
Performance specication
Module
Rset drive
current,
(mA)
Pmax
@Rset
Pthermal
max@Rset
Pmax drive
current
(mA)
Pmax@max
drive current
Pthermal
max@max
drive current
Fortimo LED HBMt 4000/740 33W Gen3 530 35 22 550 36 23.5
Fortimo LED HBMt 4000/757 33W Gen3 530 35 22 550 36 23.5
Fortimo LED HBMt 4000/840 34W Gen3 530 36 23 550 37.5 24.5
Fortimo LED HBMt 6000/740 49W Gen3 530 53 33.5 550 55 35
Fortimo LED HBMt 6000/757 49W Gen3 530 53 32.5 550 55 35
Fortimo LED HBMt 6000/840 51W Gen3 550 55 35 550 55 35
Warnings
• Driving the module above stated maximum drive current voids
product warranty and may have negatively affect product
performance or lifetime
• Driving the module above stated maximum drive may negatively
• affect product performance and lifetime
• Tcase and ∆T limits as specified in the Thermal management
section must be observed for all drive currents
Table 6. Output current, power and thermal specications
1
1. Specications are subject to change, for the latest specications please contact your local
Philips Sales Representative
2. Go to www.zhagastandard.org