Specifications

4 Philips Fortimo HBMt Gen 3 System Design In Guide
Product Name 12NC EOC
Fortimo LED HBMt 4000/740 33W Gen3 929000882806 871829174461000
Fortimo LED HBMt 4000/757 33W Gen3 929000882606 871829174467200
Fortimo LED HBMt 4000/840 34W Gen3 929000882406 871829174477100
Fortimo LED HBMt 6000/740 49W Gen3 929000882706 871829174463400
Fortimo LED HBMt 6000/757 49W Gen3 929000882506 871829174475700
Fortimo LED HBMt 6000/840 51W Gen3 929000882306 871829174483200
Cable Fortimo 7PA to 6wire - 600mm 929000803903 871829121412000
Applications
Philips Fortimo LED High Brightness Module (HBMt) Gen 3 System has been
primarily developed for outdoor applications but can also be used indoors. The 3rd
generation offers a drop-in replacement of Philips Fortimo LED High Brightness
Module (HBMt) Gen 2 System on mechanics, optics and electrics.
Product description
To operate a system the following products are needed:
Fortimo LED High Brightness Module
Compatible Philips Advance Xitanium LED Driver, see Table 2
Cable 60 cm
Classication
The Fortimo LED High Brightness Module (HBMt) Gen 3 System with Xitanium
driver can be used in:
Non-Class 2, UL system
IMPORTANT USAGE NOTES
Minimum drive current = 100 mA. If dimmed below 100 mA, Philips does not
guarantee the specified product performance
Maximum drive current depends on the specific module (please refer to Table 6).
This limit must be observed in all cases, including CLO
Tcase must not exceed stated maximum for the application, regardless of
drive current
(Tcase -Tmax.ambient) must not stated maximum for the application,
regardless of drive current
The correct values of Tcase and T (Tcase -Tmax.ambient) are specified
according the application (outdoor/indoor)
Failure to comply with usage conditions will void product warranty and will
negatively impact product lifetime and performance
Table 1. Product range
Introduction to the Fortimo LED HBMt Gen3
Figure 2. Fortimo LED HBMt Gen3 6000 lumen
Figure 3. Xitanium 150W driver
Figure 4. Cable Fortimo 7PA to 6wire - 60 mm