Specifications
14 Philips Fortimo HBMt Gen 3 System Design In Guide
Controlling Fortimo LED High Brightness Module with Xitanium LED drivers
Xitanium LED drivers allow the use of several control protocols, including 1-10V,
DALI, Integrated Dynadimmer and CLO. Fortimo LED HBMt modules can be used
with both Rset1 and Rset2 LED drivers.
Further details on programming can be found in the Design-in guide for Xitanium
LED Programmable Drivers. The Design-in guide can be downloaded via our
website at www.philips.com/ledsystemsna.
Which Philips controls can be used?
Further information about our entire portfolio of control products is available at
http://www.lighting.philips.com/us_en/connect/controls/index.wpd.
Warning!
• Using CLO will deliver the typical lumen output at end of
module’s life, constant over the whole lifetime , not the
specified initial lumen output of the module. For example,
programming CLO with a Fortimo LED High Brightness
Module 6000lm will provide a stable 5100lm over the expected
life of the module, NOT 6000lm over the expected life of
the module
• Warranty will apply only when the CLO is programmed
according to Table 15