Service manual

8
Press MENU button for 2 seconds along with plug-in AC power cord will be in factory mode, and the OSD screen
will located at
left top of panel but take cautions don’t press icon “C2” & “C1”, if you press C2/C1 , your
white-balance data will overlap with the new-one, and you must perform the white-balance process again.
The result of counter was place at top of OSD, the maximal of record memory was 65000 hours, if exceed 65000
hours the counter will keep in 65000 hours until press “ RESET” at osd-menu in factory mode.
The “ RESET” function in factory mode will execute following function:
1. clear the Power-on counter to zero hours
2. clear old auto-configuration status for all mode , so the monitor will automatically re-do auto-config when
change to next mode or power on-off
4-3 FRONT PANEL CONTROL KNOBS
Power button : Press to switch on or switch off the monitor.
Auto button : to perform the automatic adjustment from CLOCK, FOCUS, H/V POSITION, but no affect the color-
temperature, and to exit the OSD
Left/Right button : select function or do an adjustment.
Or adjust volume
MENU button : to activate the OSD window or to confirm the desired function