Service manual

3
1. SPECIFICATIONS FOR LCD MONITOR
1-1 General specifications
1. LCD-PANEL :
Active display area 15 inches or 15.1 inches diagonal
Pixel pitch 0.297 mm x 0.297 mm
Pixel format 1024 x 768 RGB vertical stripe arrangement
2. Display Color :
6-bit, 262144 colors or 8-bit, 16.7 million colors
3.
●External Controls :
a).Power On/Off, Auto key, Rotary-knob ( for shuttle)
b).Power On/Off, Auto key, Left key, Right key ( for 4-key )
●OSD menu Controls
Contrast, Brightness, Focus, Clock,H-position, V-position, Language, Recall-C2(warm color), Recall-C1 (Cool
color), Reset, Exit-OSD, Red, Green, Blue
4. Input Video Signal :
Analog-signal 0.7Vpp
Video signal termination impedance 75 OHM
5. Scanning Frequencies :
Horizontal: 29 KHz - 63 KHz
Vertical: 55 Hz – 75 Hz
Pixel clock: 80 MHz
6. Factory Preset Timing : 18
User Timings : 19
Input signal tolerance : H tolerance ±1 K, V tolerance ±1 Hz
7. Power Source :
Switching Mode Power Supply
AC 100 – 240 V, 50/60 Hz Universal Type
8. Operating Temperature : 5℃ - 35℃ Ambient
Non-operating Temperature : -20℃ - 60℃
9. Humidity :
Operating : 20% to 80% RH (non-condensing)
Non Operating : 5% to 95%RH (38.7℃ maximum wet bulb temperature)
10. Weight : 3.0 kg
11. External Connection : 15Pin D-type Connector, AC power-Cord
12. View Angle : x-axis right/left = 60, y-axis up/down = 45 ,45
13. Outside dimension : Width x Height x Thickness = 356mm x 358mm x 160mm
14. Plug and Play : VESA DDC1/DDC2B
15. Power saving : VESA DPMS