User`s manual

LM729

INSTALLATION INSTRUCTIONS (cont)

configuration. The other end terminates with a molded-on type connector

body, rated 10A, 250V, having standard CEE-22

female configuration.

Please note that power supply cord needs to use VDE 0602, 0625, 0821

approval power cord in European counties.

Connecting The Cables

Figure 2 Connecting Cables

1. 15-pin D-SUB Cable 3. AC Power Cord

2. Audio cable

Turn off your computer before performing the procedure below.

1. Connect one end of the 15-pin D-Sub cable to the back of the monitor and

connect the other end to the computer’s D-Sub port.

2. Connect the PC stereo cable between the monitor's audio input and the

PC's green audio output port.

3. Connect the female end of the AC power cord to the AC-in port on the

back of the monitor. Connect the other end to a nearby AC-outlet.

4. Turn on your monitor and computer. If you monitor diplays an image,

installation is complete. If not, refer to the FAQ (frequently asked questions)

section for troubleshooting.