Operating instructions

7. Adjustment

It needs to adjust ADC (YPbPr & VGA) and WB (YPbPr/VGA’s Normal/Warm/Cool).

ADC Adjustment

Step1. Enter into the factory mode.

Press RC key ‘menu’+’1’+’9’+’9’+’9’ or ‘menu’+’1’+’9’+’9’+’9’+’ok’.

Step2. ADC adjustment method

1. Enter into the factory mode (same as the above-mentioned).

2. Select “Current Source” (YPbPr/VGA).

3. Set Timing and Pattern of Source.

4. Timing and Pattern Setting:

YPbPr mode: Timing 314 pattern 185

VGA mode: Timing 137 pattern 42

5. Press the “Auto Color”.

WB Adjustment

Step1. Enter into the factory mode (same as the above-mentioned).

Step2.Take “YPbPr_Normal” adjust for example:

1. Select “Current Source”: YPbPr; “Color Temp”: Normal.

2. In COMPONENT mode: TIM = 314; PAT = 161(50IRE) to adjust RGB gain to meet the below spec.

Step3. Take VGA_Normal adjust for example:

1. Select “Current Source”: VGA, “Color Temp”: Normal.

2. In (VGA mode: TIM = 137; PAT = 161(50IRE)) to adjust RGB gain to meet the below spec.

Normal/ (7500K) Warm/ (6500K) Cool / (9300K)

x (center) 0.285 ± 0.020 0.313± 0.020 0.272 ± 0.020

y (center) 0.293 ± 0.020 0.329 ± 0.020 0.278 ± 0.020

Lv(center) >350cd/m

>350cd/m