User guide

English
3.1 OSD Setting Menus
Follow the instructions indicated on the bottom of the OSD Function Menu. Press
/ on the control panel or / arrow keys on the remote control to scroll
through the menus. press VOL+ on the control panel or OK on the remote control to
select an item and then press MENU to exit the OSD menu. The following menus
can be set by different adjustment methods.
3.2 Storing Channels into Memory
1 Press MENU to display the OSD main menu.
2 Press / to select the Channel menu, and
then press to enter.
3 Press / to select Air/Cable and use /
to select Air or Cable.
Air: RF signal programs by air.
Cable: RF signal programs by cable.
4 Press / to select Auto Scan, and then
press to enter.
5 Press / to select Scan all channels,
Digital channel only, or Analog channel only,
and press to perform Auto Scan function. To
stop scanning, press MENU at any time.
6 The Auto Scan screen will be shown, and after it
is done, the screen will return to the first found
channel.
CH CH
Cable
19
Channel
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
OK
EnterMove
Return
Return
Menu
Exit
OK
EnterMove
Return
Return
Menu
Exit
Channel
Scan all channels
Digital channel only
Analog channel only
OK
EnterMove
Return
Return
Menu
Exit
Channel
RF CH : 1
Found : 0
Analog : 0
Digital : 0
RF CH :
Found :
Analog :
Digital :
1
0
0
0
17
English