Service manual

3
1. SPECIFICATIONS FOR LCD MONITOR
1-1 General specifications
1. LCD-Panel :
Active display area 17 inches diagonal
Pixel pitch 0.264 mm x 0.264 mm
Pixel format 1280 x 1024 RGB vertical stripe arrangement
2. Display Color :
6-bit, 16.2 million colors
3. External Controls :
Power On/Off, Menu-key, Auto key, Left key, Right key
OSD menu Controls
Contras , Brightness, Auto Center, Focus, Clock , H/V-position , DOS mode select, R/G/B,
Color-(7200K,6500K), Languages, Reset
4. Input Video Signal :
Analog-signal 0.7Vpp
Video signal termination impedance 75 OHM
5. Scanning Frequencies :
Horizontal: 30 KHz - 83 KHz
Vertical: 55 Hz – 75 Hz
Pixel clock: 135 MHz
6. Factory Preset Timing : 17
User Timings : 13
Input signal tolerance : H tolerance ± 1 K, V tolerance ± 0.5 Hz
7. Input Power Source :
Switching Mode Power Supply
AC 100 – 240 V, 50/60 Hz Universal Type
8. Operating Temperature : 5°C - 40°C Ambient
Non-operating Temperature : 5°C - 40°C
9. Humidity :
Operating : 10% to 85% RH (non-condensing)
Non Operating : 5% to 85%RH (38.7℃ maximum wet bulb temperature)
10. Weight : 7.6 kg
11. External Connection : 15Pin D-type Connector, AC power-Cord
12. View Angle : x-axis right/left = 70, y-axis up/down = 45 ,65
13. Outside dimension : Width x Height x Thickness = 407x 434 x 173 mm
14. Plug and Play : VESA DDC1/DDC2B
15. Power saving : VESA DPMS