Downloaded From TV-Manual.
Content Downloaded From TV-Manual.com Manuals English FOR YOUR SAFETY ..........................................................................................................................2 PRECAUTIONS AND REMINDERS ...................................................................................................4 IMPORTANT SAFETY INSTRUCTIONS ............................................................................................6 Quick Installation..............................................
SA 1965 English SA 1966 DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTICE 1. 2. 3. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
DIGITAL TELEVISION TRANSITION NOTICE English This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital pro-gramming, but should continue to work as before for other purposes (e.g.
PRECAUTIONS AND REMINDERS Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside TV box or if the TV fell down. Don't throw any object inside the TV box like metals or other flammable materials. Prohibit/Avoid opening TV cabinet English Place unit on even surfaces. 4 Downloaded From TV-Manual.
Avoid direct sunlight, dusty, high humidity and smoky areas. Make sure to unplug the unit when not in use for a long period of time (days). Call service personnel to clean the internal part of the TV once a year. Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit and cause overheating. Do not place the display near water, such as bathtub, washbasin, kitchen sink laundry tub, swimming pool or in a damp basement.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
English 18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet.
Quick Installation Installing the Stand Base English 1. Place the monitor face down on a soft cloth or cushion on a table. 2. Install the stand base to the monitor. Disconnecting the Stand Base 1. Place the monitor face down on a soft cloth or cushion on a table. 2. Press the 2 tenons inwardly. 3. Pull the stand base to remove. 4. Press on four corners of the hinge cover and pull as arrow direction to disengage the hinge cover. 5. Remove the 4 screws on the hinge, then pull up the stand slowly.
Wall-mount instruction Attaching The Optional Wall Mount Arm (not supplied) English Follow these steps to finish installing the wall mounting arm: 1. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the back of the monitor. 2. Insert the 4 screws into the holes and tighten. 3. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall.
ACCESSORIES Thank you for purchasing this LCD-TV. This LCD-TV package comes with: English LCD TV Pedestal stand Remote control Battery AAA x 2 Power Cord User’s Guide book Quick Setup Guide Warranty Card 10 Downloaded From TV-Manual.
FRONT PANEL BUTTONS English Volume Up Volume Down On Screen Display Menu On/Off CH Up CH Down Input Source Selection (Enter) Power ON/OFF button Power LED Indicator Remote Control Receiver 11 Downloaded From TV-Manual.
BACK PANEL BUTTONS O P A BC D E F G A Power (AC input) B USB Terminal C HDMI1 Input Terminal D HDMI2 Input Terminal E PC Audio input F VGA signal input G YPbPr signal input H YPbPr signal Audio input (left/right) I Audio output (left/right) J AV/ S-Video signal Audio input (left/right) K Composite Video input L S-Video input M Cable/ Air TV input N Headphone Jack O HDMI3 Input Terminal P SPDIF Optical output 12 Downloaded From TV-Manual.
REMOTE CONTROL English 13 Downloaded From TV-Manual.
Remote control button function as follows: POWER Power ON/OFF 2 INFO Display current information 3 SLEEP Set timer to turn off TV 4 ZOOM Adjust window size 5 0~9, - number Directly channel select 6 GUIDE Select electronic program guide (EPG) (Only available in DTV source) 7 + VOL - Adjust volume UP/DOWN 8 EXIT OSD exit 9 UP/ DOWN/ LEFT/ RIGHT/ ENTER Move the cursor In OSD menu: UP/ DOWN for OSD function select and LEFT/ RIGHT for function adjust ENTER:Confirm selection or enter sele
INSTALLATION Connecting RF antenna and Cable TV Make sure the power is OFF before installing your LCD TV. English 1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV channels into memory with Auto Scan function when using an antenna TV system. This air input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV system (ATSC) can be found by the scanning of “AIR” with Auto Scan function. See page 35.
2) With S-Video cable: S-Video Cable (not supplied) Audio Cable (not supplied) 3) With YPbPr cable: Audio Cable (not supplied) VCD or DVD Player YPbPr Cable (not supplied) 4) With HDMI cable: VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI Cable (not supplied) 16 Downloaded From TV-Manual.
Connecting to External Stereo System to Listen to LCD TV Sound Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately). English Audio in Cable (not supplied) Stereo system Connecting to A/V Device with SPDIF input Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV.
Connecting to a Computer 1) With VGA Cable: Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. PC VGA 15 Pin Cable (not supplied) 2) With HDMI-DVI Cable: Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV.
Connecting the USB input Connect the USB device to the USB IN jack on TV. Press the MENU button to display the OSD main menu, and press ◄ or ► to select “Option” menu, then press ENTER or ▼ to enter the menu. Press ▲ or▼ to select “Media”, and use ► to enter “Media” setting. Note: This unit can play the media files contained in the USB device, and only supports JPEG, BMP, and PNG image files.
BASIC OPERATION To operate your LCD TV, you may use the TV remote control or side panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Power On/Off To turn the LCD TV on/off: Press POWER button on the right side of LCD TV or press POWER button on your remote control to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on, and lights orange when TV is off.
4. Select TV Source from Air or Cable, then press ENTER to continue. English 5. The Initial Setup will be completed after Cannel scanning is finished. To interrupt the scanning, press MENU at any time. Select input source To select the required input source: Press the INPUT button on the remote control, Use ▲▼ to select the required input source between TV, AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC and USB. To confirm the selection, press ENTER. Volume Adjusting Press + VOL– to adjust volume.
INFO To display the current information of the LCD TV: Press INFO, and the current state will be displayed on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type, etc., depending on what input source it is in.) Electronic Program Guide (EPG) Press the GUIDE button on the remote control and the program information for the channel you are watching will be displayed on the screen. This function is only available when in DTV source.
List Press LIST button and there will be a small window showing program list, you can scroll through the list to select the channel you want directly without using the ▼▲ button. English Favorite Channels Press FAV button to show Favorite List and select your favorite channels that have already been stored. (You need to preset the favorite channels from the OSD menu to enable this function.) Sleep Time Setting Repeatedly press SLEEP button to set the off timer.
Zoom In: Suitable for viewing wide-screen 2.35:1 anamorphic DVDs in full screen. 4:3: Suitable for viewing conventional 4:3 programs in their normal format. Press MTS button to choose the available sound output that is preset by TV broadcasting station. C.C Mode Press C.C button to select the caption mode. Using the OSD function You can use the OSD menus and options to adjust various settings by using the remote control. The basic operation is as following: Press MENU to display OSD menu.
ADVANCED OPERATION—OSD MENU PICTURE Menu —To adjust the picture quality In TV, AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3 source: English Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC and USB sources. In PC source: In USB source: Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC and USB sources. Picture Mode: To select picture mode between Standard, Dynamic, Soft, and Personal.
Zoom Mode: To select image size from Normal, Movie Scale, Zoom In or 4:3. (Except PC and USB source) Noise Reduction: To select noise restriction function from Middle, Strong, Off, or Weak. (Except PC and USB source) Advanced: To adjust advanced PC functions, press ► to enter. (only appear in PC source) English H-Pos: To adjust the horizontal position of the picture. V-Pos: To adjust the vertical position of the picture. Clock: To adjust clock frequency in order to get optimized horizontal size.
In AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC source: English Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC and USB sources. Sound Mode: To select sound mode between Standard, Music, Movie, Sports, and Personal. Bass: To adjust bass. Treble: To adjust the treble. Balance: To adjust left and right audio balance. Audio Language: To select the available audio languages.
TIME Menu —To set up time zone It is active in all input source: English Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC and USB sources. Sleep Timer: Off, 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min. Time Zone: To select the correct Time Zone for your area. DST: To turn on/off summer Daylight Saving Time. Time Format: To select time format from 12-hour or 24-hour. Auto Sync: To enable automatic synchronization of time.
In HDMI1, HDMI2, HDMI3 source: In USB source: English Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC and USB sources. Menu Language: To select an OSD language from English, French or Spanish. Transparency: To change the transparency of OSD window. (0%, 25%, 50%, 75%, 100%) OSD Time Out: To setup the display time of OSD. (5, 15, 30, 45, and 60 seconds) Closed Caption: To set close caption options.(Only available in TV, AV, S-Video source.
English Restore Default: To restore the factory default settings. Input Label: To change the input source name. DCR: To turn on/off the DCR (Dynamic Contrast Ratio 100,000:1) function. (Except USB source.) Over Scan: To select this function to On or Off in HDMI1, HDMI2 and HDMI3.(Only available when input signal is in video timing. Ex:480i, 480p, 720p,1080i, 1080p) Media: To set the picture slide show setting.(Only available in USB source.(See page 39)) 30 Downloaded From TV-Manual.
LOCK Menu —To set up parental control It is active in all input sources: English Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, PC and USB sources. Enter Password: Enter password and the screen below will show. (The default password is 0000.) Note: Some options will be disabled when in YPbPr, HDMI1, HDMI2, HDMI3, PC and USB source. Change Password: To change the password, press ►, and the screen on the right appears.
US: Press ► to set TV or MPAA ratings. (Only active in TV, AV, S-Video sources) English TV: To adjust TV blocking level in the US.
MPAA: To adjust movie blocking level in the US. You can select between G, PG, PG-13, R, NC-17, X, or N/A. English The movie Ratings in the US are defined as following: G (general audience) PG (parental guidance suggested) PG-13 (recommended for children 14 years of age or older) R (mature audience) NC-17 (no one under 17 years of age) X (adult audience only) N/A (Not applicable) Canada: Press ► to set Canadian English and French ratings.
Canada Eng: To adjust blocking level in English-speaking region of Canada. You can select between C, C8+, G, PG, 14+, 18+, EXEMPT. English The Canadian English Ratings are defined as following: C (children) 14+ (viewers and older) C8+ (children eight years and older) 18+ (adult programming) G (general programming, suitable for all EXEMPT audiences) PG (parental guidance) Canada Fre: To adjust blocking level in French-speaking region of Canada.
CHANNEL Menu —To set up for TV Note: The Channel Menu is only active in TV source. When in AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3 , PC and USB source, the CHANNEL Menu will not appear. English Note: The condition of DTV Signal will only be displayed when source is in DTV. TV Source: To select Cable or Air as the TV source. Auto Scan: To auto scan the TV or DTV channels. Select Air or Cable in TV Source option, and press ► to start auto scanning TV channels.
Favorite: To set your favorite channels into memory. Press ENTER to confirm / cancel your favorite channels. Press◄► to go to previous / next page. English Show/Hide: Press ENTER to skip the selected channel. To restore the channel, press ENTER again. Channel No.: Press ◄► to select a channel. The channel selected will be shown on the screen at the same time. 36 Downloaded From TV-Manual.
Channel Label: Press ► to edit a name for the current channel (the channel selected in Channel No.). Use ▲▼ to choose letters or signs, ◄► to move forward or backward, and then press MENU or ENTER to exit. English DTV Signal: To display the detected signal strength of the current DTV channel. 37 Downloaded From TV-Manual.
USB Source —To display the USB picture (only supports JPEG, BMP and PNG image files) 1. When input source is selected to USB, insert the USB device into the USB jack. symbol). 2. Use ▲ or ▼ to select the folder you want, and press ENTER. 3. Return to main menu, press ▲ or ▼ to ”--“ and press ENTER. Use ▲ or ▼ to select the image files you want, and press ENTER. In USB mode, you can use the buttons to make following functions: Press INFO can view all of the functions. 38 Downloaded From TV-Manual.
ŎPress EXIT go back to the previous page. ŎUse ► or ◄ to display the next or previous picture. ŎUse ▲ or ▼ to rotate right or rotate left the picture.(Only available in X1.0 mode) ŎPress ZOOM to zoom in. (X1.5~X4.0) ŎWhen the Zoom mode, press ▲▼◄► to move. English ŎPress ENTER to auto-play or stop the pictures. In “Option” menu can setup following functions: Note: The Media function is only active in USB source.
TECHNICAL SPECIFICATION LCD 27” TFT Active Matrix 0.3114 (H) x 0.3114 (V) mm pixel pitch Color Filter RGB vertical stripe Glass surface Anti-Glare RGB RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, fh: 30-82 kHz, fv:55-76 Hz RF TV system Antenna / NTSC+ATSC TV Cable system / CATV + Digital Cable Video 1 composite RCA, 1 S-Video, 1 YPbPr component, 3 HDMI, 1 USB 2.
SAFETY PRECAUTIONS This LCD TV is manufactured and tested to insure the user’s safety. Improper use or installation may result danger to the LCD TV as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. English WARNINGS This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV. If you’re unsure of the power supply in your residence, consult your local dealer or power company.
CARE AND MAINTENANCE Care Safety Tips If smoke, abnormal noise or odor came out of your LCD TV, remove the power cord immediately and call your service center. CAUTION-Never remove the rear cover of your LCD TV cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies. Never try to repair your LCD TV yourself. Always call your service center or a qualified technician to fix it. TROUBLESHOOTING No power Make sure A/C power cord is securely connected.
