Operating instructions

47″LCD TV AOC L47H861

8. RESET: you can use it reset all setting to default.

VGA Set: This option only shows and is available in VGA mode, which provides several items for the VGA display

fine tuning, such as : 【H-Position】,【VPosition】,【Clock】and 【Phase】. All these items giving the tuning range

from 0 to 100. 【Setting 】item provides the default VGA setting values restoring.

2.3 How to Connect

Connecting Equipment

Coaxial (RF)

Using Your Antenna or Cable for TV

1. Turn off the power to the TV.

2. Connect the coaxial (RF) connector from your antenna or cable (outof- the-wall, not from the Cable Box) to the TV

IN connector

3. Turn on the power to the TV.

4. Select TV using the INPUT button on the remote, side of the TV or directly by pressing the TV button on the

Remote Control.

Using the Antenna or Cable for your VCR

1. Turn off the power to the TV and VCR.

2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the TV IN connector

at the rear of the TV.

3. Turn on the power to the TV and VCR.

4. Select TV using the INPUT button on the remote, side of the TV or directly by pressing the TV button on the

Remote Control.

Connecting Your TV Set-Top Box

Using HDMI

TV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD TV for

optimal results.

GA SETTING MENU