Operating instructions

47″LCD TV AOC L47H861

2.2 To Use the Menus

1. Press the MENU button to display the main menu

2. Use the cursor up/down to select a menu item.

3. Use the cursor left/right to enter a submenu.

4. Press the ENTER button to enable/disable the function.

5. Press the MENU or EXIT button to exit the menu.

Press the MENU button to enter the main OSD (On Screen Display). Adjust theitems including Setup menu, Video

menu, Audio menu and Feature menu.However, some function items in the menus may only be enabled in the

particular source modes.

SETUP MENU

The Setup menu in TV mode shows as below. In others source modes, the Setup menu only shows Menu

Language and Aspect Ratio items.

1. PROGRAM NO: Show the TV channel label menu for user modifying channel labels specifically.

2. AIR/ CABLE: Select TV source signal from the Air (antenna) or Cable (CATV).

3. AUTO SEARCH: Automatically scan all NTSC TV channels and then store in the channel table. In channel scan

process, the OSD can display the number of channels which had been found.

4. SKIP :you can select the ship ON/OFF ,so that the program no channel can be delete or added.

The Video menu in most source modes shows as below. It provides several videoadjustment items for user fine

tuning the video display. Only in VGA sourcemodes, the Video menu simply provides Contrast, Brightness, Back

light and Settings (Preset) items.

If you selected PERSONAL, press or to highlight an option, then press ∧or ∨ to adjust the option. You can adjust:

1. CONTRAST: Video contrast adjustment, the tuning range is 0 ~ 100.

2. BRIGHTNESS: Video brightness adjustment, the tuning range is 0 ~ 100.

3.SATURATION: COLOR saturation adjust, the tuning range is 0 ~ 100

4. TINT: Video tint adjustment, the tuning range is R50 ~ G50.

5. SHARPNESS: Video sharpness adjustment, the tuning range is 0~10

6. BACKLIGHT: Backlight strength adjustment, the tuning range is 0 ~ 10.

7. EDGE ENHANCE: Press < or > to select HIGH, OFF, or LOW.

8.NOISE REDUCTION: Press < or > to select HIGH,OFF, LOW,or MID.

9.COLOR TEMPERATURE: Press < or > to select COOL, STANDARD, or WARM.

IDEO MENU