Operating instructions

32″ LCD TV AOC L32W431

Note: To check the remaining time, press the SLEEP button. To cancel the sleep timing, press the SLEEP button

repeatedly until 0 appears. If you turn off the TV after you set the sleep timing, the setting will be cleared. You will

need to set it again.

5. BLUE SCREEN: When there is no signal input in TV, AV, S-Video and HDTV modes, the screen will become blue.

If set to on, the screen will become blue. If set to Off, the screen will display a snowy picture when in TV signal mode

and become black in other signal modes. The default is On.

6. CC: You can enter to select the closed caption function.

7. RESET: Used to resume the TV’s default settings.

CHANNEL SETTING:

1. AIR/CABLE: You can select the TV signal AIR or CABLE.

2. AUTO SEARCH: Used to scan all the TV channels and save to memory.The TV’s total number of channels is 125

(1-125). If you use the remote control to select a number out of the range of 1-125, it will automatically skip to the

channel number you previously watched.

Menu screen in VGA mode:

The TV has a VGA analog interface, which can be switched using the INPUT button on the remote control.