Operating instructions

32″ LCD TV AOC L32W431

MODE_RGB and CH3, check whether the color temperature was in SPEC (color spec is x±15;y±15;Y±15). In this

time, most of the TV is in SPEC, while the others should be adjusted twice or more to make its color temperature in

SPEC.

4.CHECK CUT OFF: Change the input signal to 0% white level performance. Firstly, press the “brightness” from

50% to 0% and make sure the Y is not changed. Secondly, change the input signal to 32 GRAYS performance and

make sure the grays is not connected at any position.( as the 5% level is between the first gray and the second gray.

5%=（1/32）*1.6。)

1.The white color temperature in PC Mode should be app.7200K(CIE1931: x=0.303, y=0.319， Y>350),

10300K(CIE1931 : x= 0.278, y= 0.289, Y>350 ).

2.The white color temperature in AV/TV Mode should be app. 8700K(CIE1931:x=0.288±15, Y=0.301±15, Y>370).

In this Mode,we should check the black balance,which level is 26% of the white level(1.0Vpp).

3. The white color temperature in HDTV/HDMI Mode should be app. 8700K(CIE1931:x=0.288±15, Y=0.301±15,

Y>370)

Those three channels should be factory preset and not be possible to be modified.

The measurement position is the center of the display(5) at brightness set to center and

Contrast set to max. . The tolerance of the color coordinates should be less than ± 0.015