L W831
TABLE OF CONTENTS TABLE OF CONTENTS …………………………………………….....1 FOR YOUR SAFETY ………………………………………………….. 2 IMPORTANT SAFETY INSTRUCTIONS ………………………….. 5 Package Contents……………………………………………………......7 Attaching the Base ………………………………………………………7 Preparing Your LCD TV for Wall Mounting ……………………………8 PREPARATION ………………………………………………………… 9 PERIPHERAL CONNECTION GUIDE …………………………..…. 11 OPERATING INSTRUCTIONS ………………………………………. 13 TO USE THE FRONT PANEL CONTROL …………………….... 13 TO USE THE REMOTE CONTROL …………………………..….
SYMBOL SA 1965 SA 1966 SYMBOL DEFINITION DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside TV box or if the TV fell down. Don't throw any object inside the TV box like metals or other flammable materials.
Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display. Avoid direct sunlight, dusty, high humidity and smoky areas. Make sure to unplug the unit when not in use for a long period of time (days). Call service personnel to clean the internal part of the TV once a year. Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit and cause overheating.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet.
Package Contents AOC L22W831 TV unit Power cord Remote control Batteries (AAA) (Except Argentina) Audio cable signal cable User manual Quick Setup Guide IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. Attaching the Base IMPORTANT: The Base of the TV must be assembled prior to usage. 1. Place TV unit face down on a soft and flat surface (blanket, foam, cloth, 2.
Preparing Your LCD TV for Wall Mounting We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before you wall-mount your TV, you need to remove the base. To attach a wall mount bracket to your TV: 1 Remove the two T4 and two M4 screws holding your TV to the stand. 2 Remove the three screws from the bottom of the stand. 3 Secure the wall mount bracket to the back of your TV using four M6 screws, as indicated in the illustration.
PREPARATION Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket having an AC power supply. You can see LED states at the front panel. If the LED color is Blue, means the TV set is power on. If the LED color is Red, which means this TV set is in standby state. 5. Turn the TV on: Push the POWER key on the Remote control or the Front panel control knobs.
PERIPHERAL CONNECTION GUIDE HDMI S-Video Composite Pr Pb Y PC Audio in 15-pin D-Sub 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 2. PC IN– Connect the video and audio cables from a computer here. 3. AV/S-VIDEO IN – Connect the primary source for composite video devices, such as a VCR or video game.
connectors to connect the external audio from the same source. The signal being carried by the S-Video cable and connector, if connected, will take priority over the Video RCA connector (yellow connector). 4. COMPONENT (Y Pb/Cb Pr/Cr with Audio L/R) – Connect the primary source for component video devices such as a DVD Player or set top box here. From left to right, use red for Pr, blue for Pb, green for Y, red for right audio (R) and white for left audio (L) inputs. 5.
OPERATION INSTRUCTIONS TO USE THE FRONT PANEL CONTROL VOL +: Press to increase the volume. In Menu mode, functions as right arrow to go to a next menu or increase a setting. VOL - : Press to decrease the sound volume level. In Menu mode, functions as left arrow to go to a previous menu or decrease a setting. 1 VOL▲ 2 VOL▼ 3 CH ▲ CH +: Press to select the next higher Program number. 4 CH ▼ CH - : Press to select the next lower Program number. 5 MENU Menu key: Press to open or exit the OSD menu.
TO USE THE REMOTE CONTROL POWER PREV CH Press to display the previous channel . Press to power ON/OFF (standby) TV.(Note:TV is never completely power off unless physically unplugged.) MTS/SAP Press to activate the TV sounds, such as: Stereo, SAP or Mono tone. VIDEO Press to display source menu, then move focus by ∧ or ∨, and select by ENTER. WIDE Press to choose the display aspect as: Normal, Zoom and Wide mode. COMP Press to choose Component source mode directly.
Viewing Modes illustrations Normal Mode on 16:10 Display screen The original content would be at the center of the screen. mall black bars are ded on the left and right side. Wide Mode on 16:10 Display screen The original content would fill the width of the screen while the proper ratio of 16:9 content is still maintained. Little cropping of the content on the sides is necessary.
Connecting Equipment Coaxial (RF) Using Your Antenna or Cable for TV 1. Turn off the power to the TV. 2. Connect the coaxial (RF) connector from your antenna or cable (out-of-the-wall, not from the Cable Box) to the TV IN connector at the rear of the TV 3. Turn on the power to the TV. 4. Select TV using the INPUT button on the remote, side of the TV or directly by pressing the TV button on the Remote Control. Using the Antenna or Cable for your VCR 1. Turn off the power to the TV and VCR. 2.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of your VCR. Connecting Your TV Set-Top Box Using HDMI TV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD TV for optimal results. Connecting your TV Set-Top Box (Best) 1. Turn off the power to the TV and TV Set-Top Box. 2. Connect a HDMI cable to the HDMI output of your TV Set-Top Box and the other end to the HDMI Input at the rear of the TV. 3.
For TV Set-Top Boxes with DVI 1. Turn off the power to the TV and TV Set-Top Box. 2. Using a HDMI-DVI cable, connect the DVI end to your TV Set-Top Box and the HDMI end to the HDMI Input at the rear of the TV. 3. Turn on the power to the TV and TV Set-Top Box. 4. Select HDMI using the INPUT button on the remote, side of the TV, or directly by pressing the PC/HDMI button on the Remote Control. Note: a) The HDMI input on the TV supports High-bandwidth Digital Content Protection (HDCP).
5. Using an audio cable (red and white connectors), connect the cable to the audio output connectors associated with the Component output on your TV Set-Top Box and connect the other end to the audio connectors associated with the Component. 6. Turn on the power to the TV and TV Set-Top Box. 7. Select Component using the INPUT button on the remote, side of the TV or directly by pressing the COMP button on the Remote Control.
Using Coax (RF) 1. Turn off the power to the TV and Set-Top Box. 2. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box and the other end to the TV IN port at the rear of the TV. 3. Turn on the power to the TV and Set-Top Box. 4. Select TV using the INPUT button on the remote, side of the TV or directly by pressing the TV button on the Remote Control. Note: Refer to your Set Top Box user manual for more information about selecting the video or RF output of the product.
Connecting Your DVD Player Using HDMI DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the LCD TV for optimal results. Connecting your DVD Player (Best) 1. Turn off the power to the TV and DVD player. 2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI Input at the rear of the TV. 3. Turn on the power to the TV and DVD player. 4.
Using Component Video Connecting your DVD Player (Better) 1. Turn off the power to the TV and DVD player. 2. Connect the Pr (red color) connector on your DVD player to the corresponding Pr (red color) connector in the Component at the rear of the TV. 3. Connect the Pb (blue color) connector on your DVD player to the corresponding Pb (blue color) connector in the Component group at the rear of the TV. 4.
Using S-Video (AV) Connecting your DVD Player (Good): 1. Turn off the power to the TV and DVD player. 2. Connect the S-Video jack on the rear of your DVD player to the SVideo jack in the AV group on the rear of the TV. 3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the S-Video output on your DVD player and connect the other end to the audio connectors associated with the AV input on the rear of the TV. 4.
Connecting Your VCR or Video Camera 1. Turn off the TV and VCR or Video Camera. 2. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV group on the rear of the TV. 3. Connect an audio cable (white and red connectors) cable to the audio output connectors associated with the S-Video output on your VCR or Video Camera and connect the other end to the audio connectors associated with the AV input on the rear of the TV. 4.
Connecting to a PC Computer 1. Turn off the power to the TV and PC Computer. 2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the PC IN port at the rear of the TV. 3. Connect the Audio Out on your pc computer to the PC Audio input at the rear of the TV. 4. Turn on the TV and PC Computer. 5. Select PC using the INPUT button on the remote, side of the TV or directly by pressing the PC/HDMI button on the Remote.
TO USE THE MENUS 1. 2. 3. 4. 5. Press the MENU button to display the main menu Use the cursor left/right to select a menu item. Use the cursor Up/Down to enter a submenu. Press the OK button to enable/disable the function. Press the MENU or EXIT button to exit the menu. Main Menu Press the MENU button to enter the main OSD (On Screen Display). Adjust the items including Picture menu, Sound menu, Advanced menu, Installation menu ,PC setup menu and System menu.
When the input source is PC mode, Picture menu, Sound menu, PC setup menu and System menu can be selected. Picture Menu 1. Preset: Designed for different types of video mode. Can select Personal, Vivid, Standard and Mild 2. Brightness: Video brightness adjustment, can adjust only when Preset is setted as Personal.The tuning range is 0 ~ 100. 3. Contrast: Video contrast adjustment, can adjust only when Preset is setted as Personal. The tuning range is 0 ~ 100. 4.
Sound Menu The Sound menu shows as below. It provides audio adjustment for user to modify the audio setting. 1.Preset: Designed for different types of sound mode. Can select Personal, Voice, Music and Theatre. 2. Bass: Bass tone adjustment, can adjust only when Preset is setted as Personal.The tuning range is -50 ~50. 3. Treble: Treble tone adjustment, can adjust only when Preset is setted as Personal. The tuning range is -50~50. 4. Balance: Audio balance adjustment, the tuning range is -50~50. 5.
1.Noise reduction ： Designed for different noise reduce effect, user can select off, Low, Normal and High. 2. Super contrast: Enhance the contrast of color. Default setting is On. 3. Size: There are various functions provided for zoom in or zoom out. Can select Normal, Zoom, and Wide. 4. Reset: Restore the default video settings. PC setup Menu 1.Auto adjust: Automatically adjust PC input to the optimal screen size. 2.H.Position:Adjust Horizontal position of picture from -50~50. 3.V.
1.Program No.: Shows the current channel number. 2.Tuning mode: Select the mode of TV signal as Cable or Air. 3.System standard: Can set as NTSC-M, PAL-M or PAL-N. Advise please do not change this item after auto search action. 4.Auto search: Select "Auto Search" to search all signaled channel; when the searching is complete, it stays at the first channel with signal and all channels that have been located are stored.
TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners.
PRODUCT SPECIFICATION NOTE: *This model complies with the specifications listed below. *Designs and specifications are subject to change without notice. *This model may not be compatible with features and/or specifications that may be added in the future.
BEFORE CALLING SERVICE Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ” or double image *This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may inprove the picture.
GLOSSARY HDMI Input High-Definition Multimedia Interface Audio / Video Inputs Located on the rear and the front of the receiver these connectors (RCA phono type plug) are used for the input of audio and video signals. Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection options. Menu An on-screen listing of features shown on the TV screen is made available for user adjustments.
