Specifications

17" CDT Color Monitor AOC FT720
11
PARALLELOGRAM
HG
H-SIZE GAIN
ROTATION
V-LINEARITY BALANCE
RETURN
VO
V-CENTER OFFSET
Bb
BOTTOM BALANCE
TC
Top corner
9300
9300 COLOR TEMPERATURE
BC
BOTTOM CORNER
6500
6500 COLOR TEMPERATURE
HM
MAX H-SIZE RANGE
5000
5000 COLOR TEMPERATURE
SB
HIGH BRIGHTNESS SELECT
BI
SET BURN-IN
DC
video IC dc off set
HS
SUB-H-SIZE
LH
Brightness Save
V-LINEARITY
Language select
AB
ABL
FREQUENCY SELECT
VG
MAX V-SIZE GAIN RANGE
Hr
H-SIZE RANGE COMPENSATION
HL
H-Linearity Modify
VF
V-FOCUS ADJUST
BP
B+ VOLTAGE ADJUST
EA
EHT AUTO ADJUST(NC)
EU
EHT CURRENT (NC)
Hs
H-SIZE WAVE
EO
EHT OFFSET(NC)
Hb
H-SIZE WAVE BALANCE
VE
V-EHT COMPENSATION
Tb
TOP BALANCE
HE
H-EHT COMPENSATION
D. To switches the input signal to the other Timing Mode. Please follow step A ~ C to get the optimum
picture.
E. Select the "
" RETURN function and press the MENU Key, then the Factor Preset window will be
returned to the original OSD window.(user's operating condition)
F. The setting data of the CONTRAST, BRIGHTNESS, COLOR TEMPERATURE are common mode
saved in the memory. Don't needed adjust it individual at every timing Mode and save in the memory.
3. White Balance, Luminance adjustment:
A. Bias (Low Luminance) adjustment:
(a) Set mode1024×768 @85Hz full white pattern.
(b) To make the adjustment condition is under the Factory preset window.
Same as step 2-B.
(c) Warm up more than 20 minutes.
(d) Brightness
set to maximum. Contrast set to max. full white pattern, then adjust FBT
screen VR to make Y=1.0±0.1Fl
(e) Brightness set to raster just cut off (Y=0.1±0.02 Fl), adjust contrast to be 4FL, then adjust G-
Bias
, B-Bias , R-Bias , to make the setting value is(10), then adjust the R.G.B
Bias individual to the color temperature x=265±10, y=290±10.
B. Gain (High light) adjustment:
(a) Set mode 6
1024×768 @ 85Hz full white pattern.
(b) Brightness set to raster just cut off and set the contrast to max.
英华家电维修资料专用 QQ:505966338