Specifications

17" CDT Color Monitor AOC FT720
10
4-3 Adjustment Method
Horizontal Vertical Pixel Clock Sync Polarity
Display Mode
Frequency (kHz) Frequency (Hz) (MHz) (Horizontal /Vertical)
IBM, 720 x 400 31.5 70 28.3 -/+
VGA, 640 x 480 31.5 60 25.2 -/-
VESA, 640 x 480 43.3 85 36 -/-
VESA, 800 x 600 53.7 85 56.3 +/+
VESA, 1024 x 768 68.7 85 94.5 +/+
VESA, 1280 x 1024 64 60 108 +/+
1. TP901, B + & HV voltage adjustment:
A. Chroma-2000 Signal generator or PC equivalent set mode 6, UVGA 1024X768
pattern 1.0 .
B. Connect a DC Volt meter between D922“-” and ground, then adjust VR903 to be 14VDC for CPT CRT.
C. Connect a DC Volt meter between D925“-”and ground, then adjust VR902 to be 154.5 VDC for CPT
CRT.
2. Factory preset Timings Adjustment:
A. Press MENU Key to show OSD window press Up or Down Key to switch the functional controls.
B. Press the Up Key to select the "ZOOM" function, then press the MENU Key. While do not release the
MENU Key until the OSD window changed to the Factory preset window.
C. The Factory preset window contains the following functional controls. Select one of the control. Then
press the Up/Down Key to adjust its value for the optimum picture.
CONTRAST
H-MOIRE REDUCE
BRIGHTNESS
V-MOIRE REDUCE
H-CENTER
R-GAIN
H-SIZE
G-GAIN
V-CENTER
B-GAIN
V-SIZE R-BIAS
TM
BURN IN TIME
G-BIAS
PINCUSHION
R-BIAS
TRAPEZOID
DEGAUSS
PIN-BALANCE
OSD EXIT
英华家电维修资料专用 QQ:505966338