24” LCD TV L24H898
Content FOR YOUR SAFETY ............................................................................................................ 2 PRECAUTIONS AND REMINDERS ..................................................................................... 4 IMPORTANT SAFETY INSTRUCTIONS .............................................................................. 6 Quick Installation ..................................................................................................................
SA 1965 SA 1966 DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on February 17, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital pro-gramming, but should continue to work as before for other purposes (e.g.
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside TV box or if the TV fell down. Don't throw any object inside the TV box like metals or other flammable materials.
Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display. Avoid direct sunlight, dusty, high humidity and smoky areas. Make sure to unplug the unit when not in use for a long period of time (days). Call service personnel to clean the internal part of the TV once a year. Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit and cause overheating.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet.
Quick Installation Install Remove Install the stand base to the TV. Remove the stand base from the TV.
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This TV can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the TV before performing the procedure below. 1. Lay the TV face down on a soft surface. 2. Remove the hinge cover. 3.Remove the 4 screws holding the stand to the hinge. 4.Remove the stand.
Attaching The Optional Wall Mount Arm (not supplied) Follow these steps to finish installing the wall mounting arm: 1. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the back of the monitor. 2. Insert the 4 screws into the holes and tighten. 3. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall. NOTE 100mmx100mm VESA high hole (n=4), M4, pitch =0.
ACCESSORIES Thank you for purchasing this LCD-TV.
FRONT PANEL BUTTONS Volume Down Volume Up On Screen Display Menu On/Off Power ON/OFF button CH Down CH Up Input Source Selection (Enter) Power LED Indicator/ Remote Control Receiver 12
BACK PANEL BUTTONS A B C D E A Power (AC input) B Composite Video input C HDMI Input Terminal D VGA signal input E YPbPr signal input F S-Video input G AV/ S-Video signal Audio input (left/right) H YPbPr/DVI signal Audio input (left/right) I PC Audio input J Cable/ Air TV input K Headphone Jack 13 F G H I J K
REMOTE CONTROL 14
Remote control button function as follows: 1 INPUT Input source select 2 ENTER Confirm selection or enter selected menu 3 TV Direct to TV source 4 - VOL + Adjust volume UP/DOWN 5 LIST Select channel from program list 6 GUIDE Select electronic program guide (EPG) 7 0~9, - number Directly channel select 8 POWER Power ON/OFF 9 UP/ DOWN/ LEFT/ RIGHT Move the cursor In OSD menu: UP/ DOWN for OSD function select and LEFT/ RIGHT for function adjust 10 MENU On Screen Display (OSD) menu
INSTALLATION Connecting RF antenna and Cable TV Make sure the power is OFF before installing your LCD TV. 1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV channels into memory with Auto Scan function when using an antenna TV system. This air input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV system (ATSC) can be found by the scanning of “AIR” with Auto Scan function. See page 33.
2) With S-Video cable: S-Video Cable (not supplied) VCD or DVD Player Audio Cable (not supplied) 3) With YPbPr cable: YPbPr Cable (not supplied) VCD or DVD Player Audio Cable (not supplied) 4) With HDMI cable: VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI Cable (not supplied) 17
5) With HDMI-DVI cable: Audio Cable (not supplied) HDMI-DVI Cable (not supplied) VCD or DVD Player (DVD Player should have the HDMI output terminal) Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately). Headphone (not supplied) Connecting to a Computer 1) With VGA Cable: Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV.
2) With HDMI-DVI Cable: Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV. Also, connect the green end of the Audio In cable from the audio output of your computer to the audio input terminal (red/white) of the LCD TV.
BASIC OPERATION To operate your LCD TV, you may use the TV remote control or bottom panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug and the power LED indicator will light orange. Power On/Off To turn the LCD TV on/off : Press the POWER button under the LCD TV, or press the POWER button on your remote control to turn on/off the TV.
Electronic Program Guide (EPG) Press the GUIDE button on the remote control and the program information for the channel you are watching will be displayed on the screen. * The picture here shows an example of the GUIDE screen in a DTV source. Channel Select Press number key or ▼CH▲ button to select your desired channel. 1. ATV The “-” button has no function in ATV mode. Directly press the number buttons to select channels. 2. DTV Use“-＂button to select the sub channel in DTV.
Favorite Channels Press FAV button to show Favorite List and select your favorite channels that have already been stored. (You need to preset the favorite channels from the OSD menu to enable this function.) Sleep Time Setting Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – Off, 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min.
Using the OSD function You can use the OSD menus and options to adjust various settings by using the remote control. The basic operation is as following: Press MENU to display OSD menu. Press ◄► to select your desired top Menu, and press ENTER or ▼ to enter the menu you select. Use ▲▼ to select the control you want to adjust. When selecting the control with ►, press ► to enter next level menu or enable the function. Press ◄► to adjust or select the settings. Press MENU to exit from the OSD menu.
ADVANCED OPERATION—OSD MENU PICTURE Menu —To adjust the picture quality In TV, AV, S-Video, YPbPr, HDMI source: Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, and HDMI sources. In PC source: Picture Mode: To select picture mode between Standard, Dynamic, Soft, and Personal. Contrast: To adjust contrast of video. (right: Max, left: Min.) Brightness: To adjust luminance of video. (right: Max, left: Min.) Sharpness: To adjust picture sharpness. (right: sharper, left: softer.
Zoom Mode: To select image size from Full, 4:3, Movie Scale, or Zoom In. Noise Reduction: To select noise restriction function from Standard, Strong, Off, or Weak. (Not supported in or above 720p) Advanced: To adjust advanced PC functions, press ► to enter. (only appear in PC source) Auto: To auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. H-Pos: To adjust the horizontal position of the picture. V-Pos: To adjust the vertical position of the picture.
In AV, S-Video, YPbPr, HDMI, PC source: Sound Mode: To select sound mode between Standard, Music, Movie, Sports, and Personal. Treble/Bass: To adjust the treble, bass or balance. Prefer Language: To select the available audio languages. (only enabled in DTV mode) MTS: Press ◄► to select the audio language from STEREO, SAP or Mono. (only appears in ATV source) Surround Sound: To enjoy a concert hall effect, select “On” when stereo is playing. Audio Only: To turn off the screen picture but keep the sound on.
Clock: To adjust the current time. Press ► to enter. Use ◄► to move between Year, Month, Date, Hour, Minute, and use ▲▼ to adjust. Select OK and press ENTER to save the setting. ＊The “Clock” time can only be adjusted manually, when “Auto Sync” is set to “Off”. OPTION Menu —To set up OSD window In TV, AV, S-Video source: Note: The CHANNEL Menu icon on the screen will disappear in AV and S-Video sources. In YPbPr, HDMI, PC source: Menu Language: To select an OSD language from English, French or Spanish.
CC Mode: To select Closed Caption Mode from CC Off, CC On, or CC on Mute. Basic Selection: To set basic analog closed caption options. (CC1~CC4, TEXT1~TEXT4, or Off) Advanced Selection: To select closed caption signal formats and set up caption modes for digital TV channels. (Service1~6, or Off) ＊only in DTV source. Option: Press ◄► to select Mode from Default or Custom. When “Custom” is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed settings. ＊only in DTV source.
LOCK Menu —To set up parental control In TV, AV, S-Video, YPbPr, HDMI, PC source: Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI, and PC sources. Enter Password: Enter password and the screen below will show. (The default password is 0000.) Note: Some options will be disabled when in YPbPr, HDMI, or PC source. Change Password: To change the password, press ►, and the screen on the right appears. Follow the instructions to change password.
US: Press ► to set TV or MPAA ratings. TV: To adjust TV blocking level in the US.
MPAA: To adjust movie blocking level in the US. You can select between G, PG, PG-13, R, NC-17, X, or N/A. The movie Ratings in the US are defined as following: G (general audience) PG (parental guidance suggested) PG-13 (recommended for children 14 years of age or older) R (mature audience) NC-17 (no one under 17 years of age) X (adult audience only) N/A (Not applicable) Canada: Press ► to set Canadian English and French ratings.
Canada Eng: To adjust blocking level in English-speaking region of Canada. You can select between C, C8+, G, PG, 14+, 18+, EXEMPT. The Canadian English Ratings are defined as following: C (children) 14+ (viewers and older) C8+ (children eight years and older) 18+ (adult programming) G (general programming, suitable for all EXEMPT audiences) PG (parental guidance) Canada Fre: To adjust blocking level in French-speaking region of Canada.
CHANNEL Menu —To set up for TV Note: The Channel Menu is only active in TV source. When in AV, S-Video, YPbPr, HDMI, or PC source, the CHANNEL Menu will not appear. Note: The condition of DTV Signal will only be displayed when source is in DTV. TV Source: To select Cable or Air as the TV source. Auto Scan: To auto scan the TV or DTV channels. Select Air or Cable in TV Source option, and press ► to start auto scanning TV channels. Press MENU again at any time to interrupt scanning.
Favorite: To set your favorite channels into memory. Press ENTER to confirm/ cancel your favorite channels. Press◄ / ► to go to previous / next page. Show/Hide: Press ENTER to skip the selected channel. To restore the channel, press ENTER again. Channel No.: Press ◄► to select a channel. The channel selected will be shown on the screen at the same time.
Channel Label: Press ► to edit a name for the current channel (the channel selected in Channel No.). Use ▲▼ to choose letters or signs, ◄► to move forward or backward, and then press MENU or ENTER to exit. DTV Signal: To display the detected signal strength of the current DTV channel.
TECHNICAL SPECIFICATION LCD Type 23.6” TFT Active Matrix 0.2715 (H) x 0.2715 (V) pixel pitch Input signal Color Filter RGB vertical stripe Glass surface Anti-Glare RGB RGB analog (0.7/1.
SAFETY PRECAUTIONS This LCD TV is manufactured and tested to insure the user’s safety. Improper use or installation may result danger to the LCD TV as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV. If you’re unsure of the power supply in your residence, consult your local dealer or power company.
CARE AND MAINTENANCE Care Avoid exposing your LCD TV directly to sunlight or other heat source. Place your LCD TV away from the sun to reduce glare. Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD TV. Make certain your LCD TV is installed in a clean and moisture-free area. Keep your LCD TV away from magnets, motors, transformers, speakers, and TV sets.
