User Manual

13
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor c an be attached to a wall mounting arm you purc hase separately. Disconnect power before this
procedure. Follow these steps:
1 Remove the bas e.
2 Follow the manufacturer's ins tructions to as semble the wall mounting arm.
3 Place the wall mounting arm ont o the back of the monitor. Line up the holes of t he arm with the holes in the
back of the monitor.
4 Insert the 4 screws into the hol es and tighten.
5 Reconnect the cables. Refer to the user's m anual that came with the optional wall mounting arm for
instructio ns on attaching it to the wall.
Noted : VESA mounting screw holes are not available for all models, please check with th e dealer or official
department of AOC.