LCD Monitor User Manual E2275S/E2275P (LED backlight) 1 www.aoc.com ©2015 AOC. All Rights Reserved.
Safety ............................................................................................................................................................... 4 National Conventions .................................................................................................................................. 4 Power......................................................................................................................................................... 5 Installation ...............
EPEAT Declaration ....................................................................................................................................56 Service.............................................................................................................................................................57 Warranty Statement for Europe ..................................................................................................................
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power cord before cleaning the product.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
Setup Contents in Box Monitor CD Manual Audio DVI-D Stand Analog Cable DP HDMI Power Cable USB Not all signal cables (Audio, DVI-D, Analog, DP, HDMI and USB cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Setup Base Please setup or remove the base following the steps as below. Please place the monitor on a soft and flat surface to prevent the scratch.
2>Setup: Remove: 11
Adjusting Viewing Angle For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. 1>You are able to adjust the monitor's angle from -5°to 20 °. NOTE: Do not adjust the viewing angle over 20.5 degrees in order to avoid damage. 2>You are able to adjust the monitor's angle from -5°to 20 °. NOTE: Do not adjust the viewing angle over 20.
Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1 Power 2 DVI (Optional) 3 HDMI (Optional) 4 Display port(Optional) 5 Analog (D-Sub 15-Pin VGA cable) 6 AUDIO IN(Optional) 7 Earphone out(Optional) 8 USB 3.0 upstream(Optional) 9 USB 2.0 (Optional) 10 USB 3.0(Optional) 11 USB 3.0+ fast charging (Optional) To protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor.
Adjusting Setting Optimal Resolution Windows 10 For Windows 10: • Right click START. • Click "CONTROL PANEL". • Click "DISPLAY".
• Click on the "Change display settings" button. • Set the resolution SLIDE-BAR to Optimal preset resolution.
Windows 8 For Windows 8: • Right click and click All apps at the bottom-right of the screen. • Set the "View by" to "Category". • Click "Appearance and Personalization".
• Click "DISPLAY".
Windows 7 For Windows 7: • Click START. • Click "CONTROL PANEL". • Click "Appearance". • Click "DISPLAY".
• Click on the "Change display settings" button.
Hotkeys E2275SWDA / E2275SWH /E2275SWJ / E2275PWJ / E2275PWQU 1 Source/Auto/Exit 2 Clear Vision/< 3 Volume/> 4 Menu/Enter 5 Power E2275SWQE 1 Source/Auto/Exit 2 Clear Vision/< 3 4:3 or Wide/>(VGA),Volume/>(HDMI) 4 Menu/Enter 5 Power E2275SWN 1 Source/Auto/Exit 2 ECO/< 3 4:3 or Wide/> 4 Menu/Enter 5 Power Menu/Enter Press to display the OSD or confirm the selection. Power Press the Power button to turn on/off the monitor.
4:3 or wide image ratio / > When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disable to adjust. ). Auto / Exit / Source hot key When there is no OSD, press Auto/Source button continuously about 2 second to do auto configure. When the OSD is closed, press Source button will be Source hot key function.
OSD Setting Basic and simple instruction on the control keys. 1. Press the 2. Press MENU-button to activate the OSD window. or to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If there is a sub-menu, press or to navigate through the sub-menu functions. 3. Press or to change the settings of the selected function. Press AUTO to exit. If you want to adjust any other function, repeat steps 2-3. 4.
Luminance 1 Press MENU (Menu) to display menu. 2 Press or 3 Press or 4 Press 5 Press or (Luminance), and press MENU to enter.z to select to select submenu. to adjust. AUTO to exit. Contrast 0-100 Contrast from Digital-register.
Image Setup 1 Press MENU (Menu) to display menu. 2 Press or (Image Setup), and press MENU to enter. to select 3 Press or to select submenu. 4 Press or to adjust. 5 Press AUTO to exit. Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise. Sharpness 0-100 Adjust picture sharpness. H.Position 0-100 Adjust the horizontal position of the picture. V.Position 0-100 Adjust the vertical position of the picture.
Color Setup 1 Press MENU (Menu) to display menu. 2 Press or 3 Press or 4 Press or 5 Press to select (Color Setup), and press MENU to enter. to select submenu. to adjust. AUTO to exit. Color Temp. Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. Red Red gain from Digital-register. Green Green gain from Digital-register.
Picture Boost 1 Press MENU (Menu) to display menu. 2 Press or 3 Press or 4 Press 5 Press or (Picture Boost), and press MENU to enter. to select to select submenu. to adjust. AUTO to exit. Bright Frame ON/OFF Enable/Disable Bright Frame Frame Size 14-100 Adjust the Size of the Frame Brightness 0-100 Brightness Adjustment for Enhance Area Contrast 0-100 Contrast Adjustment for Enhance Area H. position 0-100 Adjust the horizontal position of the Frame V.
OSD Setup 1 Press MENU (Menu) to display menu. (OSD Setup), and press MENU to enter. 2 Press or to select 3 Press or to select submenu. 4 Press 5 Press or to adjust. AUTO to exit. Language Select the OSD language Timeout 5-120 Adjust the OSD timeout. H.Position 0-100 Adjust the horizontal position of OSD V. Position 0-100 Adjust the vertical position of the OSD.
Extra 1 Press MENU (Menu) to display menu. 2 Press or (Extra), and press MENU to enter. to select 3 Press or to select submenu. 4 Press or to adjust. 5 Press AUTO to exit. Auto Auto Detect input signal D-SUB Select D-SUB signal source as input DVI Select DVI signal source as input HDMI Select HDMI signal Source as input DP Select DP signal Source as input Auto Config. Yes / No Auto adjust.the picture to default. Off Timer 0-24 hrs Select DC off time.
Exit 1 Press MENU (Menu) to display menu. 2 Press 3 Press or to select (Exit), and press MENU to enter. AUTO to exit.
LED Indicator Status LED Color Full Power Mode Green Power Saving Orange 30
Driver Monitor Driver Windows 10 • Start Windows® 10 • Right click START. • Click "Control Panel". • Click on the "Display" icon.
• Click on the "Change display settings" button • Click the "Advanced Settings" button.
• Click the "Monitor" tab and then click the "Properties" button. • Click the "Driver" tab. • Open the "Update Driver Software-Generic PnP Monitor" window by clicking on "Update Driver... “and then click the "Browse my computer for driver software" button.
• Select "Let me pick from a list of device drivers on my computer". • Click the "Have Disk" button. Click on the "Browse" button and navigate to the following directory: X:\Driver\module name(where X is the drive letter designator for the CD-ROM drive). • • Select the "xxx.inf" file and click the "Open" button. Click the "OK" button. Select your monitor model and click the "Next" button. The files will be copied from the CD to your hard disk drive. • Close all open windows and remove the CD.
Windows 8 • Start Windows® 8 • Right click and click All apps at the bottom-right of the screen. • Click on the "Control Panel" icon • Set the "View by" to "Large icons" or "Small icons". • Click on the "Display" icon.
• Click on the "Change display settings" button. • Click the "Advanced Settings" button.
• Click the "Monitor" tab and then click the "Properties" button. • Click the "Driver" tab. • Open the "Update Driver Software-Generic PnP Monitor" window by clicking on "Update Driver..." and then click the "Browse my computer for driver software" button.
• Select "Let me pick from a list of device drivers on my computer". • Click the "Have Disk" button. Click on the "Browse" button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). • Select the "xxx.inf" file and click the "Open" button. Click the "OK" button. • Select your monitor model and click the "Next" button. The files will be copied from the CD to your hard disk drive. • Close all open windows and remove the CD.
Windows 7 • Start Windows® 7 • Click on the "Start" button and then click on "Control Panel". • Click on the "Display" icon. • Click on the "Change display settings" button.
• Click the "Advanced Settings" button. • Click the "Monitor" tab and then click the "Properties" button. • Click the "Driver" tab.
• Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... " and then click the "Browse my computer for driver software" button. • Select "Let me pick from a list of device drivers on my computer". • Click the "Have Disk" button. Click on the "Browse" button and navigate to the following directory: X:\Driver\module name(where X is the drive letter designator for the CD-ROM drive).
• Select the "xxx.inf" file and click the "Open" button. Click the "OK" button. • Select your monitor model and click the "Next" button. The files will be copied from the CD to your hard disk drive. • Close all open windows and remove the CD. • Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.
i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide.
e-Saver Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to complete software installation.
Screen+ Welcome to "Screen+" software by AOC. Screen+ software is a desktop screen splitting tool; it splits the desktop into different panels, and each panel displays a different window. You only need to drag the window to a corresponding panel when you want to access it. It supports multiple monitor display to make your task easier. Please follow the installation software to install it.
Troubleshoot Problem & Question Power LED Is Not ON Possible Solutions Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. Is the power cord connected properly? Check the power cord connection and power supply. Is the cable connected correctly? (Connected using the D-sub cable) Check the DB-15 cable connection. (Connected using the DVI cable) Check the DVI cable connection. * DVI input is not available on every model.
The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Monitor Is Stuck In Active Off-Mode" Make sure the monitor's video cable is properly connected to the computer. Inspect the monitor's video cable and make sure no pin is bent. Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Specification General Specification Panel Others Model name E2275SWN/E2275SWDA/ E2275SWH/ E2275SWJ/ E2275SWQE/ E2275PWJ/ E2275PWQU Driving system TFT Color LCD Viewable Image Size 54.6cm diagonal Pixel pitch 0.24825(H)mm x 0.
Connector Type (E2275PWQU) VGA\ DVI-D \HDMI\DP \ Line in\Earphone out\ USB2.0/USB3.0 Signal Cable Type Detachable Dimensions & Weight: Height (with base) 395.3mm Height (with base) 468.8mm (E2275PWJ/E2275PWQU) Width 504.0mm Depth 193.5mm Depth 212.9mm(E2275PWJ/E2275PWQU) Weight (monitor only) 3.2kg(E2275SWN/E2275SWDA/ E2275SWH/ E2275SWJ/ E2275SWQE) Weight (monitor only) 4.
Preset Display Modes Standard Resolution H. Frequency (kHz) V. Frequency (Hz) VGA 640x480@60Hz 31.469 59.94 VGA 640x480@67Hz 35.000 66.667 VGA 640x480@72Hz 37.861 72.809 VGA 640x480@75Hz 37.5 75 SVGA 800x600@56Hz 35.156 56.25 SVGA 800x600@60Hz 37.879 60.317 SVGA 800x600@72Hz 48.077 72.188 SVGA 800x600@75Hz 46.875 75 XGA 1024x768@60Hz 48.363 60.004 XGA 1024x768@70Hz 56.476 70.069 XGA 1024x768@75Hz 60.023 75.029 SXGA 1280x1024@60Hz 63.981 60.
Pin Assignments 15-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name 1 Video-Red 9 +5V 2 Video-Green 10 Ground 3 Video-Blue 11 N.C. 4 N.C. 12 DDC-Serial data 5 Detect Cable 13 H-sync 6 GND-R 14 V-sync 7 GND-G 15 DDC-Serial clock 8 GND-B 24-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name 1 RX2- 13 N.C. 2 RX2＋ 14 5V 3 SHLD2 15 GND 4 N.C. 16 SENSE 5 N.C. 17 RX0－ 6 SCL 18 RX0＋ 7 SDA 19 SHLD0 8 N.C.
19-Pin Color Display Signal Cable Pin No. Signal Name TMDS Data 2+ 1 Pin No. 11 Signal Name TMDS Clock Shield 2 TMDS Data 2 Shield 12 TMDS Clock 3 TMDS Data 2 13 CEC 4 TMDS Data 1+ 14 Reserved (N.C. on device 5 TMDS Data 1Shield 15 SCL 6 TMDS Data 1 16 SDA 7 TMDS Data 0+ 17 DDC/CEC Ground 8 TMDS Data 0 Shield 18 +5V Power 9 TMDS Data 0 19 Hot Plug Detect 10 TMDS Clock + 20-Pin Color Display Signal Cable Pin No. Signal Name Pin No.
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
EPA Energy Star ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. (FOR EPA CERTIFIED MODELS) EPEAT Declaration EPEAT is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
Service Warranty Statement for Europe LIMITED THREE-YEAR WARRANTY* For AOC LCD Monitors sold within Europe, AOC International (Europe) B.V. warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) B.V. will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below.
All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards. If your warranty has expired, you still have access to all available service options, but you will be responsible for the cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified or Authorized Service Center will provide you with an estimate of service costs before receiving your authorization to perform service.
Warranty Statement for Middle East and Africa (MEA) And The Commonwealth of Independent States (CIS) LIMITED ONE to THREE YEARS WARRANTY* For AOC LCD Monitors sold within the Middle East and Africa (MEA) and the Commonwealth of Independent States (CIS), AOC International (Europe) B.V. warrants this product to be free from defects in material and workmanship for a period of One (1) to Three (3) years from the manufacture date depending on sale country. During this period, AOC International (Europe) B.V.
Repair, modification, or installation of options or parts by anyone other than an AOC Certified or Authorized Service Center Improper environments like humidity, water damage and dusts Damaged by violence, earthquakes and terrorist attacks Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other irregularities This limited warranty does not cover any of the product firmware or hardware that you or any third party have modified or altered; you bear t
AOC International (Europe) B.V. Prins Bernhardplein 200 / 6th floor, Amsterdam, The Netherlands Tel: +31 (0)20 504 6962 • Fax: +31 (0)20 5046933 AOC Pixel Policy ISO 9241-307 Class 1 July 25th, 2013 AOC strives to deliver the highest quality products. We use some of the industry’s most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT monitor panels used in flat panel monitors are sometimes unavoidable.
Warranty Statement for North & South America (excluding Brazil) WARRANTY STATEMENT for AOC Color Monitors Including those Sold within North America as Specified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.
EASE PROGRAME Only for AOC branded monitors sold within the continental United States. All AOC branded monitors are now covered by the EASE Program. If your monitor malfunctions at any time during the first three months, AOC will provide a replacement monitor within 72 hours after you are approved for our program. If your monitor qualifies for the EASE program, AOC will pay for freight both ways. Step 1: Step 2: Step 3: Phone our TECH Department at 888.662.9888.
TCO DOCUMENT (FOR TCO CERTIFIED MODELS) 65
