LCD Monitor User Manual D2269VW /D2369VH/D2369V/D2769VH LED Backlight www.aoc.com ©2012 AOC.All Rights Reserved.
Safety........................................................................................................................................................................ 3 National Conventions ......................................................................................................................................... 3 Power ................................................................................................................................................................
Safety National Conventions The following subsections describe notational conventions used in this document Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power cord before cleaning the product.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
Setup Contents in Box Monitor Base CD Manual * Power Cable Analog Cable 3D Glasses * * DVI Cable Audio Cable * HDMI Cable Not all signal cables (VGA and HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Setup Stand & Base Please setup or remove the base following the steps as below.
Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from - 3.5° to 21.5°. -3.5° 21.5° NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
Connecting the Monitor Cable Connections In Back of Monitor and Computer: D2369VH/D2769VH 1 1. Power 2. Earphone 3. Audio port 4. D-Sub port 5. HDMI1 port 6. HDMI2 port 5 6 4 3 2 To protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor. 2 Connect one end of the 15-pinD-Sub/HDMI port to the back of the monitor and connect the other end to the computer's D-Sub/HDMI port.
Connecting the Monitor Cable Connections In Back of Monitor and Computer: D2369V/D2269V W DVI 1 1. Power 2. D-Sub port 3. DVI port 2 3 To protect equipment, always turn off the PC and LCD monitor before connecting. 1 2 Connect the power cable to the AC port on the back of the monitor. Connect one end of the 15-pinD-Sub/DVI port to the back of the monitor and connect the other end to the computer's D-Sub/DVI. 3 Turn on your monitor and computer.
Wall Mounting Preparing to Install An Optional Wall Mounting Arm. This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps: 1 Remove the base. 2 Follow the manufacturer's instructions to assemble the wall mounting arm. 3 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor. 4 Insert the 4 screws into the holes and tighten.
Adjusting Setting Optimal Resolution Windows 8 For Windows 8: 1. Right click and click All apps at the bottom-right of the screen. 2. Click “Control Panel". 3. Set the “view by” to “Category”. 4. Click Appearance and Personalization.
5. Click DISPLAY. 6. Set the resolution SLIDE-BAR to 1920x1080. .
Windows Vista For Windows Vista: 1 Click START. 2 Click CONTROL PANEL. 3 Click Appearance and Personalization.
5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1920 x 1080 .
Windows XP For Windows XP: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Click Appearance and Themes. 5 Double click DISPLAY.
6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1920 x 1080. Windows ME/2000 For Windows ME/2000: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Double click DISPLAY. 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1920 x 1080.
Hotkeys 1 2 3 4 5 D2369VH/D2769VH D2369V/D2269V W 1 Source/Auto/Exit 1 Source/Auto/Exit 2 2D/3D/< 2 2D/3D/< 3 Volume/ > 3 4:3 or wide / > 4 Menu/Enter 4 Menu/Enter 5 Power 5 Power Menu/Enter Press to display the OSD or confirm the selection. Power Press the Power button to turn on/off the monitor. Volume / > When there is no OSD, press Volume adjust volume. 2D/3D/< Press this hotkey continuoursly to select 2D/3D functions when the on-screen display(OSD) is unavailable.
OSD Setting Basic and simple instruction on the control keys. 1) Press the MENU-button to activate the OSD window. 2) Press < or > to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it . press < or > to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it. 3) Press < or > to change the settings of the selected function. Press AUTO to exit.
Luminance 1. Press MENU (Menu) to display menu. 2. Press < or > to select 3. Press < or > to select submenu, and press MENU to enter. (Luminance), and press MENU to enter.
4. Press < or > to adjust. 5. Press AUTO to exit. D2369VH/D2769VH Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register.
D2369V/D2269V W Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register.
Image Setup 1. Press MENU (Menu) to display menu. 2. Press < or > to select 3. Press < or > to select submenu, and press MENU to enter. (Image Setup), and press MENU to enter.
4. Press < or > to adjust. 5. Press AUTO to exit. Clock 0-100 Adjust Picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise Sharpness 0-100 Adjust picturesharpness H.Position 0-100 Adjust the horizontal position of the picture. V.Position 0-100 Adjust the vertical position of the picture.
Color Setup 1. Press MENU (Menu) to display menu. 2. Press < or > to select 3. Press < or > to select submenu, and press MENU to enter. (Color Setup), and press MENU to enter.
4. Press < or > to adjust. 5. Press AUTO to exit. Color setup. Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. Red Red Gain from Digital-register Green Green Gain Digital-register.
Picture Boost 1. Press MENU (Menu) to display menu. 2. Press < or > to select 3. Press < or > to select submenu, and press MENU to enter. (Picture Boost), and press MENU to enter.
4. Press < or > to adjust. 5. Press AUTO to exit. Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H. position 0-100 Adjust Frame horizontal Position V.
OSD Setup 1. Press MENU (Menu) to display menu. 2. Press < or > to select 3. Press < or > to select submenu, and press MENU to enter. (OSD Setup), and press MENU to enter.
4. Press < or > to adjust. 5. Press AUTO to exit. H.Position 0-100 Adjust the horizontal position of OSD V.
Extra 1. Press MENU (Menu) to display menu. 2. Press < or > to select 3. Press < or > to select submenu, and press MENU to enter. (Extra), and press MENU to enter.
4. Press < or > to adjust. 5. Press AUTO to exit. D2369VH/D2769VH Auto Select to Auto Detect input signal D-SUB Select D-SUB Signal Source as Input HDMI1 Select HDMI1 Source as Input HDMI2 Select HDMI2 Source as Input Auto Config yes or no Auto adjust the picture to default Image Ratio wide or 4:3 Select wide or 4:3 format for display DDC-CI yes or no Turn ON/OFF DDC-CI Support Reset yes or no Reset the menu to default Off Timer 0~24hours Select timing to turn off the monitor.
2D/3D 1. VGA /DVI input mode: Press the Menu key to enter the OSD menu and select the 2D/3D menu. 2D, 2D-3D,3D (SBS), 3D(T/B) modes are available for switchover. When select 2D, 3D (SBS), 3D(T/B) mode, the Stereo Index, Convergence and Scene icon in sub tier menu is disable and grey. 2. VGA /DVI input mode: Press the Menu key to enter the OSD menu and select the 2D/3D menu. When select 2D-3D mode, the Stereo Index, Convergence and Scene icon in sub tier menu is able to adjust. 3.
4. HDMI input mode under 2D: Press the Menu key to enter the OSD menu and select the 2D/3D menu. When select 2D-3D mode, the Stereo Index, Convergence and Scene icon in 3D sub tier menu is able to adjust. 5.. HDMI input mode unde r 3D: Press th e Menu key to enter the OSD menu and select the 2D/3D/ menu. Only Auto(3D) is able to select, 2D-3D, 3D（SBS),3D(T/B) mode is disable and grey. 2D/3D 2D Force to show normal 2D model. 2D-3D Force to show 2D change to 3D.
weak Stereo Index medium 2D-3D Stereo Adjustment strong Inward Convergence 2D-3D Convergence Adjustment Middle Outward Suggest max resolution 1920x1080 to be used in 2D/3D mode.
Exit 1. Press MENU (Menu) to display menu. 2. Press < or > to select Exit (Exit), and press MENU or AUTO to exit.
LED Indicator Status LED Color Full Power Mode Green Active-off Mode Orange
Driver Monitor Driver Windows 8 1. Start Windows® 8 2. Right click and click All apps at the bottom-right of the screen. 3. Click on “Control Panel”. 4. Set the “View by” to “Large icons” or “Small icons”.
5. Click on the “Display” icon. 6. Click on the “Change display settings” button. 7. Click the “Advanced Settings” button. 8. Click the “Monitor” tab and then click the “Properties” button.
9. Click the “Driver” tab. 10. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 11. Select "Let me pick from a list of device drivers on my computer".
12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 13. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 14. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive. 15. Close all open windows and remove the CD. 16. Restart the system.
Windows 7 1. Start Windows® 7 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the “Display” icon. 4. Click on the “Change display settings” button. 5. Click the “Advanced Settings” button.
6. Click the “Monitor” tab and then click the “Properties” button. 7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button.
9. Select "Let me pick from a list of device drivers on my computer". 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive. 13. Close all open windows and remove the CD.
Windows XP 1. Start Windows® XP 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category ‘Appearance and Themes’ 4. Click on the 'Display' Item.
5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below. 7. Click on the 'Driver' tab and then click on 'Update Driver...' button.
8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive). 11. Click on the 'Open' button, then click the 'OK' button. 12. Select your monitor model and click on the 'Next' button.
Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below. 6.
i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide.
e-Saver Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to complete software installation.
Screen+ Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displays a different window. You only need to drag the window to a corresponding pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the installation software to install it.
Troubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. No images on the screen Is the power cord connected properly? Check the power cord connection and power supply. Is the cable connected correctly? (Connected using the D-sub cable) Check the DB-15 cable connection. (Connected using the DVI cable) Check the DVI cable connection.
3D Troubleshooting for D2269VW / D2369VH /D2369V/D2769VH Ghost images that appear when viewing 3D effects may be a result of the following: 1. the display unit has not been adjusted to its optimum resolutio n o f 1920* 1080 a t 60HZ ; if a customer complains that they are unable to locate the resolution-1920*1080, a non-standard VGA cable is possibly being used (clock and data cables have been cancelled and as a result, EDID/DDC displayed can not be read), or the graphics adapter driver is abnormal. 2.
Precautions when viewing 3D videos 1. View 3D videos within an effective viewing distance and viewing angle. 3D effects may not be available beyond the effective viewing distance and viewing angle. 2. For the sake of your health , do not watch 3D videos or video game screens for a long time , otherwise you may develop eye strain. -Stop watching and rest immediately if you develop symptoms such as headaches, lethargy, fatigue, etc. 3.
Specification General Specification D2269VW Panel Model name D2269VW Driving system TFT Color LCD Viewable Image Size 546.20mm Diagonal Pixel pitch 0.08265*RGB(H)mm x 0.24795 (V)mm Video R, G, B Analog lnterface ,DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 170MHz Horizontal scan range 30kHz to 83kHz Horizontal scan Size(Maximum) 476.06mm Resolution Vertical scan range 50Hz to 76Hz Vertical scan Size(Maximum) 267.
D2369VH Panel Model name D2369VH Driving system TFT Color LCD Viewable Image Size 584.20mm Diagonal Pixel pitch 0.0884*RGB(H)mm x 0.2652 (V)mm Video R, G, B Analog lnterface ,HDMI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 170MHz Horizontal scan range 30kHz to 83kHz Horizontal scan Size(Maximum) 509.18mm Resolution Vertical scan range 50Hz to 76Hz Vertical scan Size(Maximum) 286.
D2369V Panel Model name D2369V Driving system TFT Color LCD Viewable Image Size 584.20mm Diagonal Pixel pitch 0.0884*RGB(H)mm x 0.2652 (V)mm Video R, G, B Analog lnterface ,DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 170MHz Horizontal scan range 30kHz to 83kHz Horizontal scan Size(Maximum) 509.18mm Resolution Vertical scan range 50Hz to 76Hz Vertical scan Size(Maximum) 286.
D2769VH Panel Model name D2769VH Driving system TFT Color LCD Viewable Image Size 686mm Diagonal Pixel pitch 0.1038*RGB(H)mm x 0.3114 (V)mm Video R, G, B Analog lnterface ,HDMI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 170MHz Horizontal scan range 30kHz to 83kHz Horizontal scan Size(Maximum) 597.888mm Resolution Vertical scan range 50Hz to 76Hz Vertical scan Size(Maximum) 336.
Preset Display Modes STAND Resolution HORIZONTAL VERTICAL FREQUENCY(kHz) FREQUENCY(Hz) 640x480@60Hz 31.469 59.940 640x480@72Hz 37.861 72.809 640x480@75Hz 37.500 75.00 800x600@56Hz 35.156 56.250 800x600@60Hz 37.879 60.317 800x600@72Hz 48.077 72.188 800x600@75Hz 46.875 75.000 1024x768@60Hz 48.363 60.004 1024x768@70Hz 56.476 70.069 1024x768@75Hz 60.023 75.029 1280x1024@60Hz 63.981 60.020 1280x1024@75Hz 79.976 75.025 WXGA+ 1440x900@60Hz 55.935 59.
Preset table for the HDMI 3D mode 3D Format Resolution Refresh Rate Frame Packing 1080p 24Hz Frame Packing 720p 50/60Hz Side-by-Side(Half) 1080p 50/60Hz Side-by-Side(Half) 1080i 50/60Hz Side-by-Side(Half) 720 p 50/60Hz Top-and-Bottom 1080p 50/60Hz Top-and-Bottom 1080p 24Hz Top-and-Bottom 720p 50/60Hz Frame Packing 480p 60Hz Side-by-Side(Half) 480p 60Hz Top-and-Bottom 480p 60Hz Frame Packing 576p 50 Hz Side-by-Side(Half) 576p 50 Hz Top-and-Bottom 576p 50 Hz For HD
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS Data 2 Shield 10 TMDS Clock + 18 +5V Power 3 TMDS Data 2 11 TMDS Clock Shield 19 Hot Plug Detect 4 TMDS Data 1+ 12 TMDS Clock 5 TMDS Data 1Shield 13 CEC 6 TMDS Data 1 14 Reserved (N.C.
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
WEEE/E-Waste declaration for India This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Service EU WARRANTY FOR AOC MONITORS LIMITED THREE-YEAR WARRANTY* For AOC LCD Monitors sold within Europe, AOC International (Europe) B.V. warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) B.V. will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below.
Warranty Statement for North & South America (excluding Brazil) WARRANTY STATEMENT for AOC Color Monitors Including those Sold within North America as Specified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.
Only for AOC branded monitors sold within the continental United States. All AOC branded monitors are now covered by the EASE Program. If your monitor malfunctions at any time during the first three months, AOC will provide a replacement monitor within 72 hours after you are approved for our program. If your monitor qualifies for the EASE program, AOC will pay for freight both ways. Step 1: Phone our TECH Department at 888.662.9888 Step 2: Fill out and return EASE registration forms by mail or fax.
Congratulations! This product is designed for both you and the planet! TCO Development works for sustainable IT manufacture, use and recycling of IT products reflecting environmental, social and economic responsibility. TCO Certified is a third party verified program, where every product model is tested by an accredited impartial test laboratory. TCO Certified represents one of the toughest certifications for ICT products worldwide.
