V27m 27” Multimedia Function Display Operating Instructions
Thank you for choosing an AOC LCD Monitor. It is recommended that you read the contents of this manual carefully before installing and turning on the monitor. Please keep this manual for future reference. Note: Our products are under continuous development and are subject to change without notice. * The monitor may not be an exact match to the illustrations in this manual. But the monitor is the standard.
Operating Instructions Content Important safety notes ..............................................................5 Read these notes before operating the device. .................5 Connection and preparation of the monitor...............................7 Parts list.............................................................................7 Installation of the base.......................................................8 Disassembly of the base....................................................
Tips.........................................................................................21 Product Specifications ............................................................22 Supported Resolution .............................................................23 Troubleshooting ......................................................................25 Glossary .................................................................................26 China RoHS Regulation Marking Requirements.....................
Important safety notes Read these notes before operating the device. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these notes. Follow these notes. Heed all warnings. Operate as per instructions. Do not use this apparatus near water (for example, near the bathtub, kitchen sink, washbasin, washing machine, in a humid basement, or near the swimming pool). If the unit is accidentally splashed, please disconnect the power plug immediately and contact the authorized distributor.
16. All servicing must be carried out by professional service personnel. Servicing is required if the device does not work normally, or has been damaged in some way. For example, if the power cord has been damaged, if liquid has been spilled on it, it has been exposed to rain or moisture, or it has been dropped. 17. The product may contain lead or mercury. Environmental factors should be taken into account when you dispose these materials.
Connection and preparation of the monitor Parts list AOC V27m Bracket Base + Screws Cleaning cloth Power cord VGA cable Warranty card Operating Instructions CD-ROM Quick Installation Guide HDMI cable Audio cable Screws 7
Connection and preparation of the monitor Installation of the base Take the monitor and the base out of the carton and assemble them, as shown in the figure below: 1. Place the monitor face down on a soft cloth or pad on the table. Tighten the screws in the base to secure the base and bracket. 2. Inset the base into the hole on the bottom of the monitor. Disassembly of the base Inset a screw driver into the base mounting hole, press it downwards, and pull out the base.
Connection and preparation of the monitor Stand the monitor on a stable surface. 1. Choose a position for the monitor that has good ventilation and make sure the ventilation holes on the cover are clear of obstruction. 2. Ensure the LCD monitor has 15cm of clearance on all sides to provide proper ventilation. 3. Do not place the LCD monitor near a radiator or other powered devices. 4. Do not use open flames, such as candles, near the monitor to prevent accidents. 5.
Connection and preparation of the monitor Installing the monitor on the wall The monitor conforms to the wall-mounted VESA standard. Please refer to the instructions for product specifications and details. To ensure your own safety and that of the monitor, use only the specified wall-mounting bracket. Please note that wall mounting must be done by a professional technician. When the monitor is mounted on a wall it must be possible to access the connectors at the back.
Turning the LCD Monitor On or Off 1. To turn on: Connect the AC power to the monitor. Press the power button on the control panel, and the indicator light will turn blue. After a few seconds the monitor will be operating normally. 2. To turn off: Press the power button on the control panel, to turn the monitor off. 3. Indicator status: ①. In normal operating mode, the monitor indicator light will be blue. ②. In standby mode, the light will be orange. ③.
Control Panel and Interface Side panel Volume + Volume - Menu Source Signal Source: Press button to enter the interface of signal source selections and press again to select the source needed. when menu is unavailable on display.Once menu occur, this key is used for confirmation purpose and select to confirm target you needed. Menu: Press to enter or exit the menu. ▲ ▼: When the menu appears on the screen, use these two buttons to select the desired option.
Source Interface A device with multiple sources can be connected to your monitor. The figure below shows how to connect. Tip: If you want to wall mount your monitor, all cables must be connected to the monitor connectors first. Whenever an external device is connected to your monitor, please make sure the monitor is turned off. When connecting an external device, connect the cable to the connector with the same color.
Source Interface Video/S-Video Input: Connect the Video or S-Video cable to the DVD player, CD player, Video Recorder, or Camcorder, etc. Audio Input: Connect the audio sources (e.g., computer, DVD player, CD player, Video Recorder, or Camcorder) to the Audio Input connector. Tip: Audio is shared between S-Video and Video.
Source Interface Auxiliary Component Input: Connect the auxiliary source audio and video (e.g., computer, DVD player, CD player, Video Recorder, or Camcorder) to the Component Input connector. HDMI Input: Connect the HDMI source (e.g., computer, DVD player, CD player, Video Recorder, or Camcorder) to the HDMI Input connector.
Source Interface PC Signal and PC Audio Input: Connect the PC to the PC input connector on the back of the monitor with a VGA cable. Also connect the audio cable between PC Audio Input of the monitor and the PC audio connector. Earphone Jack: Earphones can be connected to the Earphone jack.
Using the Menu 1. Press the Menu button to display the menu. 2. Select the menu option to be adjusted using the Up or Down key. 3. Enter the submenu by pressing the VOL Up key. Enable or adjust the function selected by pressing the VOL Up and Down key. The selected option will be highlighted. 4. Press the Menu button again to exit the menu. Source Menu Press Source button to enter the Source menu, including PC, HDMI, Video, S-video, Component.
Using the Menu Video Settings Brightness This adjusts the brightness of the screen backlight. The adjustment range is between 0 and 100. Contrast This adjusts the screen contrast. The adjustment range is between 0 and 100. Color Saturation This adjusts the screen color intensity. The adjustment range is between 0 and 100. This control is not available in PC and Component modes. Sharpness This adjusts the sharpness of the picture. The adjustment range is between 0 and 100.
Using the Menu Audio Settings (applicable to all modes) Sound Quality Switches between the five audio modes. Bass This is used to adjust the bass strength. Treble This is used to adjust the treble strength. Equalizer The sound adjustment range is 0 to 60. During adjustment from 30 to 0, the sound from the right channel will gradually decrease until it disappears. During adjustment from 30 to 60, the sound from the left channel will gradually decrease until it disappears.
Using the Menu Function settings Menu Language Aspect Ratio This sets the language used for the OSD. There are 24 available languages including English and Simplified Chinese. 4:3 16:9 Movie (This control is not available in PC mode.) Panorama (This control is not available in PC mode.) This sets the interval before your monitor will automatically enter standby mode. OSD Position This changes the OSD menu display position with 9 options available.
Tips Do not use any hard object to wipe the screen as this may cause permanent damage. Unplug the monitor before cleaning the screen. Clean the screen and casing with a clean soft cloth to remove dust. Do not use liquid cleaning agents or aerosols. Do not allow liquids to enter the LCD display as this may cause damage to its internal parts. Mobile phones Keep all mobile phones away from the monitor. The radio signals from the phone may cause image deformation and distort the sound.
Product Specifications Model V27m Panel Size (Diagonal) 686mm (27”) Native Resolution 1920 x 1080 Viewing Angle Horizontal 170° / Vertical 160° (Typ.
Supported Resolution Default PC Mode Standard Resolution H. Frequency(kHz) V. Frequency(kHz) VGA 640×480 @60Hz DMT 31.469 59.940 VGA 640×480 @67Hz MAC 35.000 66.667 VGA 640×480 @72Hz DMT 37.861 72.809 VGA 640×480 @75Hz DMT 37.500 75.000 Dos-mode 720×400 @70Hz DOS 31.469 70.087 SVGA 800×600 @56Hz DMT 35.156 56.250 SVGA 800×600 @60Hz DMT 37.879 60.317 SVGA 800×600 @72Hz DMT 48.077 72.188 SVGA 800×600 @75Hz DMT 46.875 75.000 SVGA 832×624 @75Hz 49.725 74.
Supported Resolution Standard Resolution WSXGA 1680X1050 @60Hz CVT16:10 65.290 59.954 WSXGA 1680X1050 @60Hz RB CVT16:10 64.674 59.883 HD 1920×1080@60Hz 67.500 60.000 SD 480P@60Hz for SDTV Digital only 31.469 59.94 SD 576P@50Hz for SDTV Digital only 31.250 50.000 HD 720P@60Hz for HDTV Digital 45.000 only 60.000 HD 720P@50Hz for HDTV Digital 37.500 only 50.000 HD 1080i@60Hz for HDTV Digital 33.750 only 60.000 HD 1080i@50Hz for HDTV Digital 28.125 only 50.
Troubleshooting Before calling our Customer Service, check this troubleshooting list to understand the symptoms and solutions to your problems. Symptoms Items to be inspected and measures to be taken No power Check whether the power cord of the monitor is plugged into the outlet. Unplug the monitor from the mains, wait for 60 seconds, plug it into the outlet again and turn it on.
Glossary Audio/video input These connectors (RCA-type plug) are located on the back of the monitor. It is specially designed to be used with a video recorder (or other accessories) to receive higher image resolution and sound. S-Video input Connects directly to high resolution video sources, such as a Super VHS recorder, disc player etc. and provides better image resolution and definition.
China RoHS Regulation Marking Requirements According to China's "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS, the following lists the names and content of the toxic or hazardous substances or elements that may be contained in this product.
