User`s manual

Page 8 of 83
③. Audio Inputs
A42W64AT4 shall provide two RCA type receptacles for the stereo audio signal associated
with AV1 input.
1-3-1-3 AV2
A standard definition analog video/audio source designated as AV2 shall be located at the side
of A42W64AT4. It comprises the following electrical connections. Only one of the two video
inputs shall be connected.
①. S-Video Input
A42W64AT4 shall provide a 4-pin mini-DIN connector for connection to an external
S-Video source.
②. CVBS Video Input
A42W64AT4 shall provide a RCA type receptacle for connection to an external CVBS
source.
③. Audio Inputs
A42W64AT4 shall provide two RCA type receptacles for the stereo audio signal associated
with AV2 input.
1-3-1-4 AV3
A YPbPr/YcbCr type component video interface designated as AV3 shall be located on its back
panel. It comprises the following electrical connections.
①. Video Inputs
A42W64AT4 shall provide three RCA type receptacles for connection to an external
component video source.
②. Audio Inputs
A42W64AT4 shall provide two RCA type receptacles for the stereo audio signal associated
with Component1 input.
1-3-1-5 AV4
A YPbPr/YcbCr type component video interface designated as AV4 shall be located on its back
panel. It comprises the following electrical connections.
①. Video Inputs
A42W64AT4 shall provide three RCA type receptacles for connection to an external
component video source.
②. Audio Inputs
A42W64AT4 shall provide two RCA type receptacles for the stereo audio signal associated
with Component2 input.