User`s manual

12-3-8 PDC（power down control）Board Removal
Panel
stand
2
ZOOM 1
1
3
ZOOM 2
Panel Holder
4
2
1) Remove the four sliver screws (1) and remove the panel stand from panel holder as
the direction arrowed showed.
2) Remove the four silver flat screws (2).
3) Remove the two black screws (3)
4) Remove the two silver screws (4)
5) Remove the panel holder from PDP.
Page 54 of 83
CN901
CN902
5
CN903
6) Disconnect CN901,CN902 and CN903 from PDC
board.
7) Remove the four sliver screws (5), and remove
the PDC board.