User`s manual

7、Flash Update
7-1 The list of Instrument
1、Prepare 1 piece of RS232 cable（The Pin connection see the Figure-1，If difference, please re-connect the
cable）and 1 set of PC.
2、 Connect the RS232 cable with PC and PDP(See the Figure-2).
1
RXD 2
TXD 3
DTR 4
GND 5
DSR 6
RTS 7
CTS 8
9
1
2 RXD Received Data
3 TXD Transmitted Data
4 DTR Data Terminal Ready
5 GND Signal Ground
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
9
To PC
To PC
9
Pin (Female)
Signal Pin
To Philips PDP
To Philips PDP
9 Pin (Female)
Signal Pin
1
RXD 2
TXD 3
DTR 4
GND 5
DSR 6
RTS 7
CTS 8
9
1
RXD 2
TXD 3
DTR 4
GND 5
DSR 6
RTS 7
CTS 8
9
1
2 RXD Received Data
3 TXD Transmitted Data
4 DTR Data Terminal Ready
5 GND Signal Ground
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
9
To PC
To PC
9
Pin (Female)
Signal Pin
To Philips PDP
To Philips PDP
9 Pin (Female)
Signal Pin
PDP
RS232 Cable
PC
RS232 Connector
Figure-1 Figure-2
7-2 The operation explaining Flash Update
Note: Operation Under the situation of PDP working normally.
The iDev is a Windows utility that installs hex files into the FLASH ROM of the target Image Processor
system. iDev is a Windows-based application.
Downloading is done through an RS-232 connection, which is bidirectional and serial.
Step 1: Open the file iDev (You should
Page 28 of 83