User`s manual

3-3 OSD MENU Description
3-3-1 Main MENU
1. Press “MENU” key on remote control or
front panel controls to bring up Main Menu.
2. Press “
” or “” to move the cursor up
and down the sub menu list.
3. Press “
” or “” to select sub menu item.
4. Press "Enter" to enter sub-item then use
“
” or “” to adjust.
3-3-2 SETUP MENU
1. Tuning Band: Select TV signal source
between Air and Cable. Select Cable if you
are connecting to a cable box and select Air
if you are directly connecting to the antenna.
2. DTV Signal: Display signal strength to aid
antenna adjustment.
3. Auto Ch Search: Automatically scan and store
all TV channels.
4. Manual Ch Set: Enter channel setup table.
5. Channel Labels: Display and edit channel
names.
6. Menu Language: Select language for menu
(EnglishEspañolFançaisPortuguese).
y DTV signal menu indicates signal strength
in real-time.
y Auto channel scan menu displays channel
number being scanned.
y Manual Channel Set Menu
Displays all the channel numbers that are
found.
Tune either to ATSC or NTSC channels.
Add or delete Channel number.
y Channel Labels Menu allows user labeling.
Page 16 of 83