User Manual

INSTALLATION INSTRUCTIONS

SWIVEL BASE

Install

Remove

Figure 1 Installing and Removing the Swivel Base

POWER CORD

Power Source:

1. Make sure that the power cord is the correct type required in your area.

2. This LCD monitor has an External universal power supply that allows

operation in either 100/120V AC or 220/240V AC voltage area (No user

adjustment is required.)

3. Connect the power cord into your LCD monitor’s power input socket, and

then plug the other end into a 3-pin AC power outlet. The power cord may

be connected to either a wall power outlet or the power outlet socket on