Operating instructions

15" LCD Color Monitor AOC 519Sw
5
3. Operating Instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The other control buttons are located at the front panel of
the monitor. By changing these settings, the picture can be adjusted to your personal preferences.
-
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
-
Press the power button to turn on the monitor, the power indicator will light up.
3.2 Control Buttons
1 Auto Config / Exit 4 MENU / ENTER
2 -/ECO 5 Power Button
3 +/DCR
Power Button /Power Indicator:
Press this button to switch ON/OFF of monitor’s power.
Green Power On mode.
Orange — Power saving mode.
MENU / ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in volume OSD status.
Contrast :
Adjust contrast or adjust function.
Brightness :
Adjust brightness or adjust function.
Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).
2. When OSD menu is in off status, press this button to activate the Auto Adjustment function.
The Auto Adjustment function is used to optimized the HPos, VPos, Clock and Focus.