LCD Monitor User Manual 24G2/24G2U/27G2/27G2U LED backlight 1 www.aoc.com ©2019 AOC. All Rights Reserved.
Safety........................................................................................................................................................................ 3 National Conventions ......................................................................................................................................... 3 Power ................................................................................................................................................................
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power cord before cleaning the product.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
Setup Contents in Box Monitor CD Manual Power Cable Warranty card HDMI Cable Stand DP Cable VGA Cable Base USB Cable Audio Cable Not all signal cables (HDMI / DP / VGA / USB /Audio cables), CD manual will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Setup Base Please setup or remove the base following the steps as below. Please place the monitor on a soft and flat surface to prevent the scratch.
Adjusting the monitor For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1 HDMI 2 2 HDMI 1 3 DP 4 Analog (D-Sub 15-Pin VGA cable) 5 Earphone out 6 Power 7 Line in 8 USB-PC upstream 9 USB 3.2 Gen 1 10 USB3.2Gen1+Quick Charging 11 USB 3.2 Gen 1 12 USB 3.2 Gen 1 To protect equipment, always turn off the PC and LCD monitor before connecting. 1. Connect the power cable to the AC port on the back of the monitor. 2.
Freesync function 1. Freesync function is working with DP/HDMI1/HDMI2 2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.
Adjusting Hotkeys 1 Source/Auto/Exit 2 Game Mode/< 3 Dial Point/> 4 Menu/Enter 5 Power Source/Auto/Exit When the OSD is closed, press “ ” button will be Source hot key function. When the OSD is closed, press “ models with D-Sub).
OSD Setting Basic and simple instruction on the control keys. 1. Press the 2. Press MENU-button to activate the OSD window. or press the to navigate through the functions. Once the desired function is highlighted, to activate it. If there is a sub-menu, press or to navigate through the sub-menu functions. 3. Press or to change the settings of the selected function. Press to exit. If you want to adjust any other function, repeat steps 2-3. 4.
Luminance 1 Press MENU (Menu) to display menu. 2 Press or 3 Press or to select submenu. 4 Press or to adjust. 5 Press to select (Luminance), and press to enter. to exit. Contrast 0-100 Contrast from Digital-register.
Image Setup 1 Press MENU (Menu) to display menu. 2 Press or to select 3 Press or to select submenu. 4 Press or to adjust. 5 Press (Luminance), and press to enter. to exit. Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise. Sharpness 0-100 Adjust picture sharpness. H. Position 0-100 Adjust the horizontal position of the picture. V. Position 0-100 Adjust the vertical position of the picture.
Color Setup 1 Press MENU (Menu) to display menu. 2 Press or to select 3 Press or to select submenu. 4 Press or to adjust. 5 Press (Luminance), and press to enter. to exit. Color Temp. Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. User Recall User Color Temperature from EEPROM Full Enhance ON/OFF Disable or Enable Full Enhance Mode.
Picture Boost 1 Press MENU (Menu) to display menu. 2 Press or to select 3 Press or to select submenu. 4 Press or to adjust. 5 Press (Luminance), and press to enter. to exit. Bright Frame ON/OFF Enable/Disable Bright Frame Frame Size 14-100 Adjust the Size of the Frame Brightness 0-100 Brightness Adjustment for Enhance Area Contrast 0-100 Contrast Adjustment for Enhance Area H. position 0-100 Adjust the horizontal position of the Frame V.
OSD Setup 1 Press MENU (Menu) to display menu. 2 Press or 3 Press or 4 Press or 5 Press to select (Luminance), and press to enter. to select submenu. to adjust. to exit. Language Select the OSD language. Timeout 5-120 Adjust the OSD timeout. DP Capability 1.1/1.2 please be noted that only DP1.2 support free sync function H. Position 0-100 Adjust the horizontal position of the OSD. V. Position 0-100 Adjust the vertical position of the OSD. Volume 0-100 Volume Adjustment.
Game Setting 1. Press MENU-button to display menu. 2. Press or to select 3. Press or to select submenu, and press MENU-button to enter. 4. Press or to adjust. 5. Press AUTO-button to exit. (Game setting), and press MENU-button to enter. FPS RTS Game Mode Racing Gamer 1 Gamer 2 Gamer 3 off For playing FPS (first Person Shooters) games. Improves dark theme black level details. For playing RTS (Real Time Strategy). Improves the image quality.
Extra 1 Press MENU (Menu) to display menu. 2 Press or 3 Press or 4 Press or 5 Press to select (Luminance), and press to enter. to select submenu. to adjust. to exit. Input Select Auto/D-SUB/HDMI1/HDMI2/DP Select input signal source. Auto Config. Yes / No Auto adjust the picture to default. Off Timer 0-24 hrs Select DC off time. Wide 4:3 1:1 17” (4:3) 19” (4:3) 19” (5:4) (27G2/27G2U) Image Ratio Select image ratio for display. 19”W (16:10) 21.
Exit 1 Press MENU (Menu) to display menu. 2 Press or 3 Press to select (Luminance), and press to exit. LED Indicator Status LED Color Full Power Mode White Power Saving Orange 22 to enter.
Driver G-Menu Welcome to “G-Menu” software by AOC. G-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide. The software Supported operating systems: Windows 10, Windows 8, Windows 7. Note: Features are not available for all models.
e-Saver Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to complete software installation.
Screen+ Welcome to "Screen+" software by AOC. Screen+ software is a desktop screen splitting tool; it splits the desktop into different panels, and each panel displays a different window. You only need to drag the window to a corresponding panel when you want to access it. It supports multiple monitor display to make your task easier. Please follow the installation software to install it.
Troubleshoot Problem & Question Power LED Is Not ON Possible Solutions Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. Is the power cord connected properly? Check the power cord connection and power supply. Is the cable connected correctly? (Connected using the D-sub cable) Check the DB-15 cable connection. (Connected using the DVI cable) Check the DVI cable connection.
The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Monitor Is Stuck In Active Off-Mode" Make sure the monitor's video cable is properly connected to the computer. Inspect the monitor's video cable and make sure no pin is bent. Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Specification General Specification Panel Others Model name 24G2/24G2U Driving system TFT Color LCD Viewable Image Size 60.5 cm diagonal Pixel pitch 0.2745(H)mm x 0.2745(V)mm Video R, G, B Analog Interface & HDMI Interface & DP Interface Separate Sync. H/V TTL Horizontal scan range 30~160KHz Horizontal scan Size(Maximum) 527.04mm Vertical scan range 48-144Hz Vertical scan Size(Maximum) 296.
Panel Others Model name 27G2/27G2U Driving system TFT Color LCD Viewable Image Size 68.6 cm diagonal Pixel pitch 0.3114(H)mm x 0.3114(V)mm Video R, G, B Analog Interface & HDMI Interface & DP Interface Separate Sync. H/V TTL Horizontal scan range 30~160KHz Horizontal scan Size(Maximum) 597.888mm Vertical scan range 48-144Hz Vertical scan Size(Maximum) 336.
Preset Display Modes Standard Resolution H. Frequency (kHz) V. Frequency (Hz) VGA 640x480@60Hz 31.469 59.94 VGA 640x480@67Hz 35 66.667 VGA 640x480@72Hz 37.861 72.809 VGA 640x480@75Hz 37.5 75 VGA 640x480@100Hz 51.08 99.769 VGA 640x480@120Hz 61.91 119.518 DOS MODE 720x400@70Hz 31.469 70.087 DOS MODE 720x480@60Hz 29.855 59.710 SD 720x576@50Hz 31.25 50 SVGA 800x600@56Hz 35.156 56.25 SVGA 800x600@60Hz 37.879 60.317 SVGA 800x600@72Hz 48.077 72.
Pin Assignments 15-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name 1 Video-Red 9 +5V 2 Video-Green 10 Ground 3 Video-Blue 11 N.C. 4 N.C. 12 DDC-Serial data 5 Detect Cable 13 H-sync 6 GND-R 14 V-sync 7 GND-G 15 DDC-Serial clock 8 GND-B 19-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 11 TMDS Clock Shield 2 TMDS Data 2 Shield 12 TMDS Clock 3 TMDS Data 2 13 CEC 4 TMDS Data 1+ 14 Reserved (N.C.
20-Pin Color Display Signal Cable Pin No. Signal Name Pin No.
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
