21.5" LCD Color Monitor AOC e2236Vw Service Service Service Horizontal Frequency 30-80 kHz TABLE OF CONTENTS Description Page Description Page Table of Contents…………………..…………………..…...1 6.2.Power Board..……….........................................38 Revision List.…...................................................……......2 7.PCB Layout..……….............................................41 Important Safety Notice.….….............................……......3 7.1.Main Board………..…........................
1.5" LCD Color Monitor AOC e2236Vw Revision List Revision Date Revision History A00 Nov.
21.5" LCD Color Monitor AOC e2236Vw Important Safety Notice Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service procedures recommended by AOC and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended.
21.5" LCD Color Monitor 1. Monitor Specifications LCD Panel Resolution Model name Driving system Viewable Image Size Pixel pitch Video Separate Sync.
21.5" LCD Color Monitor 2. LCD Monitor Description AOC e2236Vw The LCD monitor will contain a main board, an adapter board, a converter board, two USB boards and a key board which house the flat panel control logic, brightness control logic and DDC. The power part will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each voltage.
21.5" LCD Color Monitor 3. Operating Instructions AOC e2236Vw 3.1 General Instructions Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences. - The power cord should be connected. - Connect the video cable from the monitor to the video card. - Press the power button to turn on the monitor, the power indicator will light up. 3.
21.5" LCD Color Monitor AOC e2236Vw 1. Power 2. Analog (DB-15 VGA cable) 3.DVI To protect equipment, always turn off the PC and LCD monitor before connecting. 1. Connect the power cable to the AC port on the back of the monitor. 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port. 3.
21.5" LCD Color Monitor AOC e2236Vw 3.
21.
21.5" LCD Color Monitor AOC e2236Vw Game Movie Sports Notes : When Eco mode is not set as “Standard”, Contrast and Brightness can not be adjusted; When DCR is set as “On”, Contrast, Brightness, Eco mode and Gamma can not be adjusted.
21.
21.
21.5" LCD Color Monitor AOC e2236Vw Off Exit Notes : Full Enhance: Total color saturation is enhanced, suitable for vivid pictures. Natural Skin: Suitable for human portrait. Green Field: Suitable for large area of green. Sky Blue: Suitable for sky or ocean scene. Auto Detect: Suitable for outdoor or garden. Demo: Screen divided into two for comparison purpose.
21.
21.5" LCD Color Monitor AOC e2236Vw Exit Notes : When Eco mode is not set as “Standard”, Contrast and Brightness can not be adjusted; When DCR is set as “On”, Contrast, Brightness, Eco mode and Gamma can not be adjusted. Image Setup --- Clock, Phase, H.Position, V.Position, Exit Clock Phase H.
21.5" LCD Color Monitor AOC e2236Vw V.Position Exit Notes : When the input source is digital signal like DVI or HDMI, Image Setup can not be adjusted.
21.
21.
21.5" LCD Color Monitor AOC e2236Vw sRGB Exit Notes : One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.
21.5" LCD Color Monitor AOC e2236Vw Picture Boost --- V.Position, H.Position, Contrast, Brightness, Frame Size, Bright Frame, Exit V.Position H.
.5" LCD Color Monitor AOC e2236Vw Brightness Frame Size Bright Frame 21
21.5" LCD Color Monitor AOC e2236Vw Exit Notes : One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly. Extra ---Language, Reset, DDC-CI,OSD Timeout, Transparency, V. Position, H.
21.
21.5" LCD Color Monitor AOC e2236Vw V. Position H.
21.
21.
21.5" LCD Color Monitor 4. Input/Output Specification AOC e2236Vw 4.1 Input Signal Connector D-SUB connector PIN NO. DESCRIPTION PI N NO. DESCRIPTION 1 Video-Red 9 +5V 2 Video-Green 10 Ground 3 Video-Blue 11 N.C. 4 N.C.
21.5" LCD Color Monitor AOC e2236Vw 4.2 Factory Preset Display Modes STAND VGA VGA VGA VGA Dos-mode SVGA SVGA SVGA SVGA SVGA XGA XGA XGA XGA *** SXGA SXGA WXGA+ WSXGA HD HORIZONTAL VERTICAL FREQUENCY(kHZ) FREQUENCY(Hz) 31.469 35 37.861 37.5 31.469 35.156 37.879 48.077 46.875 49.725 48.363 56.476 60.023 60.241 60 63.981 79.976 55.935 65.29 67.5 59.94 66.667 72.809 75 70.087 56.25 60.317 72.188 75 74.55 60.004 70.069 75.029 74.927 60 60.02 75.025 59.887 59.
21.5" LCD Color Monitor AOC e2236Vw 4.3 Panel Specification 4.3.
21.5" LCD Color Monitor AOC e2236Vw 4.3.2 Optical Characteristics AUO M215HW01 Ta=25℃ 4.3.3 Electrical Characteristics 1.TFT LCD Module: AUO M215HW01 Note1:Measurement conditions: The duration of rising time of power input is 470us.
21.5" LCD Color Monitor AOC e2236Vw 2.
21.5" LCD Color Monitor 5. Block Diagram AOC e2236Vw 5.1 Main Board 715G3329 1 2 FLASH MEMORY MX25L2026MI Crystal 14.
21.5" LCD Color Monitor AOC e2236Vw 5.2 Power Board Adapter 715G3189P02LED001S AC input Bridge Rectifier and Filter EMI filter Transformer 14.
21.5" LCD Color Monitor 6. Schematic AOC e2236Vw 6.1 Main Board 715G3329 1 2 FB102 VGA_B+ 0R05 1/10W 5% R103 1K 1/16W 5% R104 1K 1/16W 5% R106 2K2 1/16W 5% R107 C103 C104 2K2 1/16W 5% 22pF 22pF DSUB_H DSUB_V DSUB_SCL DSUB_SDA 1 2 3 DDC1_SCL DSUB_SCL 15 14 100R 1/16W 5% 13 DDC1_SDA DSUB_SDA 12 11 FB103 V_Sy nc VGA_G+ 1 2 R111 BEAD VGA_PLUG DSUB_5V VGA_G+ VGA_R+ U103 AZC199-04S 1 2 3 I/O1 I/O4 GNDVDD I/O2 I/O3 6 5 4 100R 1/16W 5% C109 5pF/50V R112 75R 1/16W 5% 候綼 U103 C124 0.
21.5" LCD Color Monitor AOC e2236Vw CN301 5 PA[0..9] PA[0..9] 5 PA0 PA1 PA2 PA3 PA4 PA5 PA6 PA7 PA8 PA9 PB[0..9] PB[0..
21.5" LCD Color Monitor CMVCC1 AOC e2236Vw 2,3 SOT 252 9 8 7 6 5 4 3 2 1 CMVCC1 CMVCC1 BKLT-VBRI BKLT-EN PANEL_ID# Volume# Mute1 VIN VOUT ADJ(GND) 3 2 1 Both 223 and 252 foot-print CN701 R709 NC R710 NC Volume# PANEL_ID# 5 Mute 5 CMVCC1 0.1uF/16V VIN VOUT C708 U701 AP1117E33LA 2,3,5 CMVCC1 C707 C709 0.1uF/16V + 0.1uF/16V 100UF25V VCC3.
21.5" LCD Color Monitor AOC e2236Vw VCC3.3 FB402 VPLL VCC3.3 FB401 300OHM AVDD 300OHM C408 0.1uF/16V 3 4 6 7 9 10 12 13 100 1 0.1uF/16V 26 C417 VCC3.
21.5" LCD Color Monitor AOC e2236Vw 6.2 Power Board Adapter 715G3189P02LED001S R904 30 OHM 1/4W L903 C910 2N2 500V C919 2N2 500V ZD901 R906 30 OHM 1/4W + 1 1 ! C907A 100uF 450V 3 + 2 + + C907 NC/47uF M 450V C906 R919 1500PF2KV 100K OMH 2W +-5% 2 3 4 - D902 4 ! 4 Relayout 3.3 OHM 1/4W R908 30 OHM 1/4W 10 1 C911 C920 2N2 500V 2N2 500V F902 FUSE +5V R917 1K 1/10W 1% L902 R909 30 OHM 1/4W 2.
21.5" LCD Color Monitor AOC e2236Vw NC +5V1 ON/OFF_INPUT R621 R622 NC Q621 NC R620 NC BKLT-VBRI PANEL ON/OFF_OUTPUT R624 NC R623 0R05 1/10W NC +5V1 DIM_INPUT R626 R627 NC Q622 NC R625 NC BKLT-EN PANEL DIM_OUTPUT R629 NC R628 0R05 1/10W T P V ( Top Victory Electronics Co . , Ltd. ) OEM MODEL e936vw Size 絬隔瓜絪腹 G3189-POC-LED-X-6-090825 TPV MODEL ADPC91503HC3 Key Component 04.
21.5" LCD Color Monitor AOC e2236Vw Converter 715G4137P01000004S R852 NC R853 NC ZD801 1 1 2 3 4 C802 100uF 50V DIM ENA SK310B Q801 + C801 0.1uF 50V S2 G2 S1 G1 2 D2 D2 D1 D1 8 7 6 5 C804 33U + R833 R832 R831 R830 C810 0.1uF 50V C803 0.1uF 50V R844 10 OHM 1/10W R845 NC 0.3 OHM +-1% 1/4W R846 R847 R801 NC 0.
21.5" LCD Color Monitor 7. PCB Layout AOC e2236Vw 7.
21.5" LCD Color Monitor AOC e2236Vw 7.
21.
21.5" LCD Color Monitor AOC e2236Vw 7.3 Key Board 715G3371 2 7.
21.5" LCD Color Monitor 8. Maintainability AOC e2236Vw 8.1 Equipments and Tools Requirement 1. Voltmeter. 2. Oscilloscope. 3. Pattern Generator. 4. DDC Tool with an IBM Compatible Computer. 5. Alignment Tool. 6. LCD Color Analyzer. 7. Service Manual. 8. User Manual.
21.5" LCD Color Monitor AOC e2236Vw 8.2 Trouble Shooting 1.
21.5" LCD Color Monitor AOC e2236Vw 2.
21.5" LCD Color Monitor 3.
21.5" LCD Color Monitor AOC e2236Vw 4.
21.5" LCD Color Monitor 9.Firmware and DDC Instruction AOC e2236Vw 9.1 Firmware Instruction(TSUM IC ISP for exemple TSUMO58GDJ) 1. OPERATION CONDITIONS: 1) An i486 (or above) personal computer or compatible. 2) Microsoft operation system Windows XP. 3) “MSTAR ISP Tool V4.5.0.7.7”programs. 4) Printer cable and VGA cable. 5) ISP board (PN: 715GT039-A). 2.
21.5" LCD Color Monitor AOC e2236Vw 4 .Program: 1)Run MSTAR ISP Tool V4.5.0.7.
21.5" LCD Color Monitor AOC e2236Vw 3)Choose DEVICE,and choice WP Pin pull to high during ISP : 4)Choose CONNECT icon ,and interface show Device type , PC and monitor communications successful, click “OK”.
21.5" LCD Color Monitor AOC e2236Vw 5)Click “Read”, show as follow picture, then choose correct software to click “open. PS:For exemple TSUMO58GDJ_LGLM215WF4_20100518_V005_8143.BIN 6 )Then ,as below : 7.
21.
21.5" LCD Color Monitor AOC e2236Vw 9).Then , press Run icon ,as below,Show Blank OK, Program OK, Verify OK, It’s successfully if interface show PASS. 10) AC off, wait about one minute, after the elextricity large capacitance of power board release, then AC on, otherwise, the key button and power button cann't work. 5.Check Software Version and auto color and reset: You should check the program code is right in factory mode ;(about the method of enter factory mode ,pls reference the service manual ) 5.
21.5" LCD Color Monitor AOC e2236Vw 3)Choise the AUTO LEVEL icon and run it. 4)Check the gray pattern is clear ; 5)Change to full black pattern , and check the display there is no noise . 5.2Reset Monitor would change to default setting after reset . 5.3power off Monitor must be turned off after rework code. 6:HDCP Write SOP I. Prepare condition: 1. Prepare one PC and the system is WIN98/NT/2000/XP, make sure the PC have Print Port. 2.
21.5" LCD Color Monitor AOC e2236Vw II. HDCP Write Step: Step1. Double click “HDCP20091026.exe” Step2. Click “Load HDCP…”. choose the corresponding “*.BIN” by scaler IC (MST Scaler) ,then click “Open” as below.
21.5" LCD Color Monitor AOC e2236Vw Step3. Pls choose the item remarked in red (i.e.: New CMD/Only Connect One Monitor/MST Scaler), then click “Start” to write HDCP, when display “Monitor 1 PASS” means Write OK.
21.5" LCD Color Monitor AOC e2236Vw III. Check HDCP. USE “Blu-Ray Disc” DVD to check whether the monitor with DVI connector displays normally. If error message appeared “ ” as below: 1. Check whether the HDCP writer is correct. 2. Check whether the tool is correct or not, and check the connection between PC, Monitor and tool. In addition, check whether the tool’s power supply is available. 3. If still no work, pls modify the “config.ini” as below, and then try again. Modify Step: Right click “config.
21.
21.
21.5" LCD Color Monitor AOC e2236Vw 9.2 DDC Instruction Tool list: 1. DDC board:715GT034-B 2. Software (WA.DAT&WD.DAT&*. CONFIG.INI) 3. LPT driver software 4. LPT cable, D-SUB CABLE ,DVI CABLE and DVI to HDMI CABLE 5. 12V( Adapter) 6. TPVDDCHDMI and TPVDDC6.0 7. PC 8.
21.5" LCD Color Monitor AOC e2236Vw VGA&DVI Burning: 1.Double-click the icon “ Double-click ” to install Port95nt print driver, and then restart the computer. , select “Analog and DVI” show as follow picture 2. Click “Load file” and select as follow picture.
21.5" LCD Color Monitor AOC e2236Vw 3. Click “ok” show as follow picture. 4.Input same SN twice and date. Click “Pragram” to burn. When appear “pass” as follow picture that burning is successful.
21.5" LCD Color Monitor AOC e2236Vw 5. Click “program”, Note: . Appear fault as follow , please input SN twice and burning again.
21.5" LCD Color Monitor AOC e2236Vw When appear “pass” as follow picture that burning is successful. Click “Read both” show as follow picuture..If read SN and model name are same as before inputing as before that burning is successful.
21.5" LCD Color Monitor AOC e2236Vw Appear fault as follow, please check the connection of LPT cable , Tool adapter cable and LCD power. Appear fault as follow,please check the connection of VGA and the connection of DVI Note: If the burn software is unsuccessfulll, appear fault: 1. For VGA,the resolution will be not the best achieve. 2. For DVI,No picture,no sound. If program failed, in VGA mode, you can’t use the optimal resolution.
21.5" LCD Color Monitor AOC e2236Vw When Read is OK, program is NG, pls do take following action: 1. For VGA,cut off the 9th pin (connect the monitor). 2. For DVI, cut off the 14th pin (the shortest pin, power supply). 3. Connect the EEPROM WP pin to ground.
21.5" LCD Color Monitor 10. White- Balance, Luminance Adjustment AOC e2236Vw Approximately 30 minutes should be allowed for warm up before proceeding White-Balance adjustment. 1. How to do the Chroma-7120 MEM. Channel setting A. Reference to chroma 7120 user guide B. Use “ SC” key and “ NEXT” key to modify x, y, Y value and use “ID” key to modify the TEXT description Following is the procedure to do white-balance adjust 2. Setting the color temp. you want A. MEM.CHANNEL 3 (6500K color): 6500K color temp.
21.5" LCD Color Monitor AOC e2236Vw 2. Switch the MEM.channel to Channel 9(with up or down arrow on chroma 7120) 3. The LCD-indicator on chroma 7120 will show x = 283 ±30, y = 297 ±30, Y = 170 cd/m2 4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100 5. Adjust the GREEN on factory window until chroma 7120 indicator reached the value G=100 6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100 7.
21.5" LCD Color Monitor 11.Mechanical Instructions AOC e2236Vw 1.Put the monitor on the EPE pad. 2.Lay down the monitor, then use cross screwdriver or the expert tools leave off the stand while press the Push area of the back cover. 3.Overturn the monitor and the top towards to us.
21.5" LCD Color Monitor AOC e2236Vw 4.Take apart the front frame with hands on the label area. 5.As the center of one side of USB connector, take apart 3 sides and stop. Attention: Do not break off the key pc side, or pull the front frame forcibly, to avoid the keypad peel off. 6.Overturn the monitor, on the USB connector area, one hand press the Panel, and use the other to undrawn the back cover.
21.5" LCD Color Monitor AOC e2236Vw 7.Make the notice that the front frame of the key pc side should be separated at last. 8. In turn to take apart the key pc connect PIN (A&B), lamp line (C&D), peel off the aluminum foil (E&F), draw off the FFC pin (G), if there is defect with main pc, need leave of f the six-angle screw (H). 9.Withdraw the front frame from the Panel side. Use screwdriver to take off the screw which used to fix the iron frame and Panel, and then take apart them.
21.5" LCD Color Monitor AOC e2236Vw 10. According to the different defective area, take off the screws ABCDE to get the relevant part to maintain. Before take apart the POWER pc should take off the AC iron piece first. 11. Use little screwdriver to peel off the key pc from the front frame when need maintain it.
21.5" LCD Color Monitor 12.
21.5" LCD Color Monitor 13. BOM List AOC e2236Vw Note: The parts information listed below are for reference only, and are subject to change without notice. Please go to http://cs.tpv.com.cn/hello1.asp for the latest information. TIAASL2E6WA1BNE Location HDCP-L E08907 E09503 E09503 E09503 E09504 E09504 E750 E08907 Part NO.
21.
21.
21.
21.
21.
21.
21.
21.
21.