LCD Monitor User Manual 16T2 www.aoc.com ©2020 AOC. All Rights Reserved.
Safety........................................................................................................................................................................ 3 National Conventions ......................................................................................................................................... 3 Installation..........................................................................................................................................................
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power cord before cleaning the product.
Maintenance To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel. Unplug the monitor if you are not going to use it for an extensive period of time. Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off.
Setup Contents in Box Monitor CD Manual Micro HDMI-HDMI cable Smart Cover Power Adapter USB C-C/A cable * VESA_bracke Screw * Different according to region. * USB-C has various different specifications. Before purchasing the AOC 16T2 USB-C Monitor, please confirm that your device’s USB-C port has support for “DP Alt Mode”. This is essential for the monitor to receive video from your device via USB-C cable.
Adjusting Viewing Angle For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to your own preference. Hold the Smart Cover and Monitor so you will not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from 20° to 30 °(Horizontal) or from 25° to 30 °(longitudinal). NOTE: 1. Do not adjust the viewing angle over 20~30 degrees(Horizontal) or 25~30 degrees(longitudinal) in order to avoid damage. 2.
Wall Mounting Preparing to Install An Optional Wall Mounting Arm. This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps: 1 2 3 Attach the VESA_bracket lock to the back of monitor with 4 screws. Follow the manufacturer's instructions to assemble the wall mounting arm. Place the wall mounting arm onto the VESA_bracket. Line up the holes of the arm with the holes in the VESA_bracket.
Connecting the Monitor 1 USB C 2 Micro HDMI 3 Power Button 4 USB C 5 Audio out To protect equipment, always turn off the PC and LCD monitor before connecting. 1. Connect one end of the USB C-C/A signal cable to the USB C interface of LCD. Connect the other end to the USB C interface of computer (DP Alt mode supported), mobile device or USB A interface. 2. 3. Your computer should detect the USB Monitor automatically.
Multi-Touch Screen User can use Display Multi-touch Function under operating system higher than Window 7 home premium. Before using Display Multi-touch Function, user need to connect basic wires ( power cable, HDMI cable, USB cable). Then user can fully enjoy Multi-touch Function. Part of specific use, please see the following drawings.
Adjusting Hotkeys 1 Battery indicator light 2 Menu/Volume/Increase 3 Battery capacity display 4 Power on/off 5 Power indicator light Battery indicator light Battery capacity 0%~5% show red color. Battery capacity 5%~50% show orange color. Battery capacity 50%~75% show yellow color. Battery capacity 75%~100% show green color. Menu/Volume/Increase Press to display the OSD. When Power on, press button to display OSD or adjust OSD function (0~100 or OD strength adjustment, etc.).
LED status indicator Power on - white. Standby - white flashes and goes out after about 3 minutes. Charging - orange. Charge your phone/tablet When 16T2 is switched on, the phone/tablet is connected and the signal indicator shows an orange light.Press the battery power button for 3~5 seconds, the power light appears white and starts charging (you can observe whether the phone has been charged from the mobile phone, then the screen of power mode switch will be reconnected, and the flash is normal).
Type C function working status for charge: Charging status: (Type C 1=TC1, Type C 2=TC2) TC1 and TC2 support PD adaptor CC profile 5V/3A input. When TC 1 and TC 2 both are insert adaptor that will select one port to charge who is first insert. TC 1(TC 2) insert adaptor and TC 2 (TC 1) connection to mobile phone or tablet, the status will be monitor and mobile phone or tablet both are charged.
OSD Setting Basic and simple instruction on the control keys. 1). Press the key to activate the OSD window. 2). You can now select any one of the functions by quickly repeat-pressing the button. The cursor will navigate towards the right as you press the key. You can release once the cursor highlights the option you want to choose. Note that the selection is one way loop always moving one direction and then returning at beginning of the menu.
Exit Exit the main OSD 1. Main menu will disappear if no action for about 3 seconds.. 2. Sub menu will disappear if no action for about 3 seconds.. 3. Before entering OSD menu,monitor will be powered off when continually pressing the more than 3 seconds. 4. The input source selection does not display the current input source.
Driver i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide.
e-Saver Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to complete software installation.
Screen+ Welcome to “Screen+” software by AOC. Screen+ software is a desktop screen splitting tool; it splits the desktop into different panels, and each panel displays a different window. You only need to drag the window to a corresponding panel when you want to access it. It supports multiple monitor display to make your task easier. Please follow the installation software to install it. The software Supported operating systems: Windows 10， Windows 8,Windows 7.
Troubleshoot This section provides tips for correcting problems, should any occur. It also describes how to contact AOC should you encounter problems that you cannot resolve. Before you call AOC service center, please read the troubleshooting advice in this manual and in your computer User's Manual. You may also want to consult with your system administrator or company technical support staff. Problem & Question Possible Solutions Check the connectors.
Specification General Specification Panel Others Dimensions & Weight: Model name 16T2 Driving system TFT Color LCD Viewable Image Size 39.49cm diagonal Pixel pitch 0.1793 (H)mm x 0.1793 (V)mm Display Color 262K Colors Dot Clock 148.5MHz Horizontal scan range 30~85KHz Horizontal scan Size(Maximum) 344.16 mm Vertical scan range 48Hz ~ 75Hz Vertical scan Size(Maximum) 193.
Compatible with all DP Alt mode PC or Laptop: Recommend list is as the below (16T2 DC ON status). No.
Mobile device charging No. Type Brand Name Model Name 2nd Display Supports Touch 38 DT MSI Vortex G65 √ √ 39 NB Panasonic CF-SV78R8QP √ √ 40 Razer BLADE 15.
Preset Display Modes Standard Resolution H. Frequency (kHz) V. Frequency (Hz) VGA 640x480@60Hz 31.469 59.94 SVGA 800x600@56Hz 35.156 56.25 SVGA 800x600@60Hz 37.879 60.317 XGA 1024x768@60Hz 48.363 60.004 SXGA 1280x1024@60Hz 63.981 60.02 WXGA+ 1440x900@60Hz 55.935 59.887 WSXGA 1680x1050@60Hz 65.29 59.954 WSXGA 1680x1050@60Hz 64.674 59.883 HD 1920x1080@60Hz 67.
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
