Conversion Kit Instructions

7
C. CAUTION LABEL
Peel o󰀨 back of caution label and place as near to rating plate as possible, taking care not to cover any
existing labels.
D. CARTON IDENTIFICATION
Using a black permanent marker, cross out heater identication on carton as appropriate. In bold letters, write new electrical
specications on carton, matching those on the revised rating plate.
E. SHIPPING CARTON
Close and tape the cardboard ap on the front of carton and re-install the top locator if removed. Seal top of carton.
CAUTION
DO NOT ENERGIZE THE BRANCH CIRCUIT FOR ANY REASON BEFORE THE HEATER TANK IS FILLED WITH WATER.
DOING SO WILL CAUSE THE HEATING ELEMENTS TO BURN OUT AND VOID WARRANTY.
VII. MISCELLANEOUS INFORMATION
Table 2. FULL LOAD CURRENT IN AMPERES
kW
Input 208V 240V
4.5 21.6 18.8
5.5 N/A 22.9