Conversion Kit Instructions

6
VI. FINAL ASSEMBLY
A. CONTROL COVER(S).
Replace plastic personnel protector(s). Unfold insulation. Cover all elements and thermostats as originally constructed.
Replace door(s) and tighten the screws.
B. RATING PLATE MODIFICATION OF DUAL ELEMENTS ELECTRIC WATER HEATERS.
Following is an example of the standard rating plate supplied on the front of dual element commercial electric water
heaters.
MODEL NUMBER
VOLTS - AC
COMMERCIAL STORAGE
TANK WATER HEATER
PHASE
TOTAL WATTS
CONNECTED
VOLTS AC
CIRCUIT
ALTERNATE RATINGS
ITEM ID / PART NUMBER
LLC
SERIAL NUMBER
WATTS
UPPER
WATTS
LOWER
TOTAL WATTS
CONNECTED
NOMINAL
CAPACITY
US GAL.
MAX WORKING
PRESSURE
WATTS
UPPER
WATTS
LOWER
LISTED
22U1
The volts, phase, and watts information
of the rating plate must be modied
by covering them with the rating
plate overlay label provided in the
conversion kit. Be sure the new ratings
on the label match the conversion you
have just completed.
Figure 2. Rating Plate Figure 3. Rating Plate Overlay
Peel o󰀨 the back of label and paste over the area as shown on the revised rating plate below.
MODEL NUMBER
VOLTS - AC
COMMERCIAL STORAGE
TANK WATER HEATER
PHASE
TOTAL WATTS
CONNECTED
VOLTS AC
CIRCUIT
ALTERNATE RATINGS
ITEM ID / PART NUMBER
LLC
SERIAL NUMBER
WATTS
UPPER
WATTS
LOWER
TOTAL WATTS
CONNECTED
NOMINAL
CAPACITY
US GAL.
MAX WORKING
PRESSURE
WATTS
UPPER
WATTS
LOWER
LISTED
22U1
Figure 4. Rating Plate