Brochure

COMMERCIAL WATER HEATERS
STRENGTH IN NUMBERS
Cyclone Mxi water heaters can be installed in manifolded multiples to serve the highest demand
applications in place of boiler systems. For example, four BTH-500s can be manifolded to provide total
storage of 476 gallons with an input of 2,000,000 BTU.
The Cyclone
®
Mxi features power vent and power direct vent design, allowing clean uncontaminated
air to be drawn directly into the unit with the flue gas products vented through the ceiling or
directly through the wall to the outside.
UNRIVALED VENTING VERSATILITY
The Breadth Of Innovation
Diagram applies to BTH-120 through BTH-250 models only
BTH-300 through BTH-500 vents up to 70 equivalent feet using 4” PVC or 120 equivalent feet using 6” PVC
3˝ Vent
50´ Intake
50´ Exhaust
4˝ Vent
120´ Intake
120´ Exhaust
3´ Vent
50´ Intake
50´ Exhaust
4˝ Vent
120´ Intake
120´ Exhaust
3˝ Vent
50´ Exhaust
4˝ Vent
120´ Exhaust
3˝ Vent
50´ Exhaust
4˝ Vent
120´ Exhaust
Direct Vent Vertical Direct Vent Sidewall Power Vent Vertical Power Vent Sidewall
EASIER TO INSTALL
Because installation space today is almost always at a premium, we’ve designed the Cyclone to install
in an absolute minimum of space. The exhaust outlet and fresh air intakes are positioned so the water
heater can be placed either in a corner or against a wall.
ADVANCED GLASS LINING TECHNOLOGY
Exclusive PermaGlas
®
Ultra Coat
™
glass lining protects all Cyclone
water heaters. PermaGlas Ultra Coat provides superior protection
for all inner tank surfaces, as well as for the inside of the heat
exchanger, which would otherwise be vulnerable to corrosion from
flue gas condensate. The innovative helical coil minimizes weld
points to extend tank life.