Product Overview

ManualsBrandsAO Smith ManualsCommercial Water Heaters75 Gallon - 76,000 BTU Conservationist Power Direct Vent Commercial Gas Water Heater

www.hotwater.com | 800-527-1953 Toll-Free USA | A. O. Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015

Page1 of 2

AOSCG11300

DYNACLEAN

™

DIFFUSER DIP TUBE

• Helps reduce lime and sediment buildup and

maximizes hot water output. Made from long-

lasting PEX cross-linked polymer

BLUE DIAMOND

GLASS COATING

• Provides superior corrosion resistance

compared to the industry-standard glasslining.

HOT SURFACE IGNITION

• Has a solid state ignition surface that does not

ﬂutter or blow out.

• Provides increased reliability and efﬁciency

over spark ignition systems. Eliminates the

pilot and saves energy.

ENHANCED-FLOW BRASS DRAIN

VALVE

• Have a solid brass, tamper resistant, enhanced

ﬂow, ball type, drain valve.

• Uses a standard female hose ﬁtting that

allows for fast and easy draining during

maintenance.

• Designed for easy operation, this valve

includes an integral screwdriver slot that

features a ¼ turn (open/close) radius, which

not only permits full straight through water

ﬂow but also a quick and positive shut off.

CSA CERTIFIED AND ASME RATED

T&P RELIEF VALVE

MAXIMUM HYDROSTATIC

WORKING PRESSURE 150 PSI

STANDARDS

• Design-certiﬁed by CSA International,

according to ANZI Z21.10.3 - CSA 4.3

standards governing storage-type water

heaters.

• Meets the thermal efﬁciency and standby

loss requirements of the U.S. Department of

Energy and current edition of ASHRAE/IESNA

90.1.

POWERED DIRECT VENTING

• Provides more venting ﬂexibility.

• Roof or sidewall venting with 3” or 4” PVC,

CPVC, ABS or polypropylene.

• Allowable vent lengths of up to 125

equivalent feet make installation easy in any

situation.

QUIET MODULAR BLOWER

• Built-in safety device prevents pilot or main

burner operation if blower is not operating.

• Blower has 100/120V electrical system, with

maximum 2-amp draw.

3-YEAR LIMITED TANK / 1-YEAR

LIMITED PARTS WARRANTY

• For complete warranty information, consult

written warranty or contact A. O. Smith.

CONSERVATIONIST

POWER DIRECT VENT

Commercial Gas

Water Heaters

The BPD-80 tank-type commercial gas water heater is intended for light-duty

applications such as small ofﬁce buildings and duplex apartment homes. The

BPD-80 features a power direct-vent design, with a factory-installed blower. The

blower permits sealed combustion direct-vent operation, with separate venting and

air intake runs from outside the structure. The BPD-80 offers installation versatility by

allowing venting and intake runs up to 50 equivalent feet, using 3” Schedule 40 PVC

pipe.

The power direct-vent design also eliminates the potential for performance

and safety problems caused by negative air pressure, a problem found in many

commercial applications with inadequate indoor ventilation.

BPD-80

SERIES 210/211

Summary of content (2 pages)

PAGE 1
Commercial Gas Water Heaters CONSERVATIONIST® POWER DIRECT VENT The BPD-80 tank-type commercial gas water heater is intended for light-duty applications such as small office buildings and duplex apartment homes. The BPD-80 features a power direct-vent design, with a factory-installed blower. The blower permits sealed combustion direct-vent operation, with separate venting and air intake runs from outside the structure.
PAGE 2
Commercial Gas Water Heaters C D A B G F E H DIMENSIONS Model Number Units A B C D E F G H Water Connections Gas Connection BPD-80 Inches cm 70-5/8 179 61-1/2 156 26 66 33-7/8 86 11 28 13-1/4 36 53 135 15-1/4 39 3/4” NPT 1/2” NPT Approx. Shipping Weight 277 lbs 126 kg Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. RECOVERY CAPACITIES U.S. GALLONS/HRS. AND LITRES/HR.