Brochure

8
BPD Gas Power Direct Vent
Models
80% thermal efficiency, ideal for
commercial applications and where
negative air pressure is a problem
The BPD-75 tank-type commercial gas water heater is
intended for applications such as small office buildings
and duplex apartment homes. The BPD-75 features a
power direct vent design with a factory-installed blower.
The blower permits sealed combustion direct vent
operation with separate venting and air intake runs from
outside the structure. The BPD-75 offers installation
versatility by allowing venting and intake runs up to 50
feet, using 3˝ Schedule 40 PVC pipe. The power direct vent
design also eliminates the potential for performance and
safety problems caused by negative air pressure, which is
found in many commercial applications with inadequate
indoor ventilation.
DynaClean
™
II Automatic
Sediment-Cleaning System
n
Specially designed dip tube directs incoming
cold water to create turbulence in the tank
to reduce lime and sediment build-up
n
Prolongs tank life, maintains high energy
efficiency, maximizes hot water output
Quiet Modular Blower
n
Built-in safety device prevents pilot or main
burner operation if blower is not operating
n
Blower has 110V/120V electrical system,
with maximum 2A draw
Durable Brass Drain Valve
CSA Certified and ASME Rated T&P Relief Valve,
Factory-Installed
Meets the Thermal Efficiency and Standby Loss
Requirements of U. S. Department of Energy and
Current Edition of ASHRAE/IESNA 90.1
Maximum Hydrostatic
Working Pressure: 150 PSI
3-Year Limited Tank Warranty
All dimensions in inches
MODEL
NO.
GAL.
CAP.
BTU
INPUT PER
HOUR
RECOVERY
GPH/°F
TEMP. RISE
HT. DIA.
APPROX.
SHIP.
WEIGHT
40 100 140
BPD-75
Natural
75 70,000 161 64 46 69-5/8 26 352
BPD-75
Propane
75 65,000 148 59 42 69-5/8 26 352
AOSCA80000 R July 2014 Commercial Catalog_108078_ResidentialFul#7A635.qxd 7/16/14 4:25 PM Page 8