Brochure

17
BTF-80 Power Vent
Single Flue Water Heaters
All models are approved for
use in combined appliance
applications.
GAS WATER HEATERS
MODEL
NUMBER
GALLON
CAPACITY
BTU
INPUT
PER
HOUR
RECOVERY
GPH/°F
TEMP. RISE
DIMENSIONS
IN INCHES
APPROX.
SHIPPING
WEIGHT
(LBS)
40 100 140 HEIGHT* DIAMETER
BTF-80 74 80,000 194 78 55 66-5/16 25-3/8 340
CFC-Free Foam Insulation
n
Minimizes radiant heat loss
Dip Tube
n
Carries inlet water deep
into tank
Hot Surface Ignition
n
Has a solid state ignition surface
that does not flutter or blow out
n
Provides increased reliability and
efficiency over spark ignition
systems
n
Eliminates the pilot and saves
energy
Intelli-Vent Control
n
Provides temperature control
and LED diagnostics
Glasslined Tank
n
Glass specifically developed by
A. O. Smith for water heaters is
permanently fused to steel at
1,600°F, providing years of
corrosion protection and
dependable use
Anode
n
Tank-mounted, screw-in
replaceable anode for longer
tank life
High Input
n
80,000 BTU input assures plenty
of hot water is available by
providing faster recovery rates
and higher draws
Burner
n
High input, multiport burner for
improved combustion efficiency
and low NOx
Turbo Shot
™
Combustion System
n
Air is precisely drawn through
the combustion control port and
exhausted through plastic pipe
n
Controlling the airflow through
the heater enhances and
regulates the combustion process
n
In standby mode, the combustion
control port restricts air
circulation through the heater
Powered Venting
n
Provides more venting flexibility
and savings
n
A new quiet blower allows
exhaust venting through the roof
or sidewall with plastic pipe such
as PVC, CPVC, and ABS
n
Allowable vent lengths of up to
100 equivalent feet make
installation easy in any situation
n
BTF-80 is a Category 3 (positive
pressure non-condensing)
appliance
Approval Ratings and
Certification
n
All models comply with: ANSI
Z21.10.3/CSA 4.3 and ASHRAE/IES
90.1 – 2004
n
Meets Texas and other low NOx
areas requiring 40 ng/J
3-Year Limited Tank
Warranty
*Height to top of draft hood
Intelli-Vent™ is a Registered Trademark of Emerson Electric Company
AOSCA80000 R July 2014 Commercial Catalog_108078_ResidentialFul#7A635.qxd 7/16/14 4:26 PM Page 17