User Guide
Installation, Operation, and
Maintenance Manual
Product Preservers
®
Anti-Scale System
Chemical-Free, Salt-Free Scale Prevention
Introduction
The Product Preservers
®
Anti-Scale System will condition the tap water
providing optimum water characteristics for many applications. The result
is reduced equipment maintenance requirements, longer equipment life
and improved quality & consistency of your products.
The Product Preservers
®
system is built with the finest and most advanced
materials and each system is quality inspected and pressure tested prior
to shipment. With proper installation and routine maintenance, you will
have years of trouble-free operation.
Please refer to this manual when performing routine filter changes. The
instructions make periodic maintenance quick and easy and ensure you
will receive maximum benefit from your system.
System Specifications
Model SM1.0L LG1.5L
Peak Flow Rate
6 gpm
(23 lpm)
10 gpm
(38 lpm)
Service Flow Rate
0.25 - 4 gpm
(1 - 15 lpm)
0.5 - 10 gpm
(1.9 - 38 lpm)
Gallon Rating for
Cartridge
Up to 4 gpm,
24/7/365 for 2 years
Up to 6 gpm,
24/7/365 for 2 years
Maximum Pressure
90 psi
(6.2 bar)
Temperature
35°F - 100°F
(2°C - 38°C)
Inlet/Outlet
Connections
3
/4" FNPT
Water pH 6.5 to 8.5
Hardness (max) 75 grains (1300 ppm CaCO3)
Chlorine < 3 ppm
Iron (max) 0.3 mg/l
Manganese (max) 0.05 mg/l
Copper none allowed
Oil & H2S none allowed
Polyphosphate none allowed
Silica (max) 10 ppm
Capacity: The Product Preservers
®
cartridge does not have
a grain removal capacity, however, other contaminants pres-
ent in the water will gradually degrade the effectiveness of this
cartridge. Change the system cartridge at least once every two
years.