Full Product Manual

50138+20333 - 2 of 2
D
STANLEY
C
B
265 mm (10 3/8")
GUIDE TO MOUNTING THE CABINET ON THE WALL
ATTACHING THE MOUNTING PLATE
2
1
HANG THE CABINET ON THE WALL
INSTALL THE MOUNTING PLATE AT
YOUR DESIRED HEIGHT. MEASURE
FROM THE EDGE OF THE
FLOOR UP
MARK A HORIZONTAL LINE WITH THE
MEASUREMENTS IN THE DRAWING,
MARK THEM WITH AN X
INSERT 3 ANCHORS PER MOUNTING
PLATE WHERE THE X ARE USING A DRILL
WITH A HEXAGONAL BIT
WITH THE LEVEL OVER THE MOUNTING
PLATES MAKE SURE THAT THEY ARE
LEVELED ON BOTH SIDES.
A
A
WITH TWO OR MORE PEOPLE LIFT
THE CABINET UP ONTO THE MOUNTING
PLATE.
C
7/16"
3/4"
3 Regulations
Height 7/16"
Front 3/4"
Side 5/16"
B
STANLEY
D
INSTALL THE DOOR AND PLACE
THE HANGER COVERS OVER
THE HANGERS.
LEVEL THE CABINET.
MAKE SURE THAT THE HANGERS ARE
COMPLETELY ATTACHED TO THE PLATE
AND THEN ADJUST THEM IF NECESSARY
Lot No: